# Rotary steps off since updating to latest version!

**URL:** <https://forum.lightburnsoftware.com/t/rotary-steps-off-since-updating-to-latest-version/75565>\
**Category:** LightBurn Software Questions\
**Tags:** rotary\
**Created:** [September 4, 2022, 2:07pm UTC](https://forum.lightburnsoftware.com/t/rotary-steps-off-since-updating-to-latest-version/75565 "2022-09-04T14:07:12Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [September 5, 2022, 1:30am UTC](https://forum.lightburnsoftware.com/t/rotary-steps-off-since-updating-to-latest-version/75565/8 "2022-09-05T01:30:39Z")

</div>

Rotary setup is really pretty straight forward…

Whatever axes you’re using, read the motor drivers steps/rotation off the switches…

 ![20211121_190227](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/4/e4e530ccc97f4924e6cdde50b9d95cd92ee9ffc1.jpeg)

Match them up with the placard…

 ![menu](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/9/a910a8a09c8b487c714f0148bbb2cd3f827c5a38.jpeg)

My setting is 2000 steps/rotation.

With a chuck type, you would use this value in the rotary gui.

If it’s a wheel type rotary, you need to apply a ‘ratio’ of the motor to the driving wheel.

Mine is 2.5 the motor will turn 2.5 times for the ‘wheel’ to turn one rotation.

Steps/rotation is 2.5 \* 2000 = 5000 in the gui…

![rotary-controller-settings](https://forum.lightburnsoftware.com/uploads/default/original/3X/8/9/89bee046a7075f2483f48741115388530ebed945.png)

You will have to enter the wheel diameter, 62mm in my case.

For the chuck type, you will have to enter the diameter of each object…

😸

---

_[View the full topic](https://forum.lightburnsoftware.com/t/rotary-steps-off-since-updating-to-latest-version/75565)._
