I have a 60 Watt OmTech MF1624. It had the KT332N controller in it. But unfortunately it was struck by lightning along with my computer. And I am replacing it with the Ruida 6442S controller. I don’t have a backup settings file from my old controller. Does anyone have a file that would work with my new setup? Any help is much appreciated.
Have you tried to connect to it with Lightburn?
Even if it won’t run the machine, it may let you access the data.
I have a 6442g, and have modified some of these values, but have fun… if it breaks your machine, don’t blame me 
blue-laser-machine-settings.lbset (12.7 KB)
Good luck
Why are you changing the controller?, is the old one broken?
I have 60 Watt OmTech MF1624 with KT332N controller, if you still need the data I can send it during the day.
I would guess, they stated
It shouldn’t matter if it’s an S model as far as I know. These are just vendor settings.
… those who can read have advantage 
I read the original post again and have found out of it, ups …
I’ve tried connecting with Lightburn and also tried to back it up through the Udrive on the controller. It just looks like the it’s fried.
Always worth a try… too bad, they should outlaw these types of lightening strikes.
Good luck