# Ruida 6445: 0-0 is possible, then nothing more

**URL:** <https://forum.lightburnsoftware.com/t/ruida-6445-0-0-is-possible-then-nothing-more/187837>\
**Category:** LightBurn Software Questions\
**Tags:** ruida\
**Created:** [February 23, 2026, 7:00pm UTC](https://forum.lightburnsoftware.com/t/ruida-6445-0-0-is-possible-then-nothing-more/187837 "2026-02-23T19:00:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Relleumdesign](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/47e85d/32.png) [@Relleumdesign](https://forum.lightburnsoftware.com/u/Relleumdesign)\
**Post date:** [February 23, 2026, 7:01pm UTC](https://forum.lightburnsoftware.com/t/ruida-6445-0-0-is-possible-then-nothing-more/187837/1 "2026-02-23T19:01:00Z")

</div>

Hi,

I have no idea what happend nor how I can reset this.

I kind of worked with the axis settings in Lightburn bc the ruida was runnin in the wrong direction for 0-0.

I changed the wiring polarity, then this worked. I changed the Lightburn setting so THIS worked.

But then sth happened and the creeping direction in search of 0-0 inversed. I assume the Ruida thought it’s in both wrong quadrants and tried to creep from supposedly negative positions to the assumed 0-0?

So I inversed the wiring again, this time to the factory settings.

Now, when it has found 0-0, I can move no more to x nd y (positive) with either the Ruida or Lightburn. I can only run against the wall, loosing steps, then move a bit around.

**Conclusion** : Ruida thinks it’s correctly on 0-0 and moves only to calculatory positive values which are “against the wall” (hardware -x and -y)  
Now I can only change the wiring direction, but then it will creep into the wrong directions when resetting.

**Question** : so how do I tell the Ruida in which direction it has to search for 0-0 ? I can either search or move correctly, not both.

I could not find any Ruida settings for where is 0-0 (left bottom corner) or like. Well I did, but it had no effect - or was I too confused?

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [February 24, 2026, 12:25am UTC](https://forum.lightburnsoftware.com/t/ruida-6445-0-0-is-possible-then-nothing-more/187837/2 "2026-02-24T00:25:21Z")

</div>

> [@Relleumdesign](#):
>
> so how do I tell the Ruida in which direction it has to search for 0-0 ?

Ruida controller _always_ seek home switches in the negative direction. The corner where the switches are will be (0,0) after homing succeeds, with the coordinates _increasing_ away from the switches in whatever direction that may be.

[We crawled through the process](https://forum.lightburnsoftware.com/t/cant-get-limit-switches-to-reverse-polarity/86945) a while ago and I wrote it up so I could find it again:

> **[Ruida Controller Home/Limit Switch Configuration](https://softsolder.com/2023/01/11/ruida-controller-home-limit-switch-configuration/)**
>
> Careful experimentation on the actual controller in hand seems prudent

The position of the home switches determines the coordinate system layout: _there are no other choices_.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [March 26, 2026, 12:26am UTC](https://forum.lightburnsoftware.com/t/ruida-6445-0-0-is-possible-then-nothing-more/187837/3 "2026-03-26T00:26:20Z")

</div>

Closed on March 26, 2026, 12:26am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
