# Ruida 6445 max speed & scan angle 45deg

**URL:** <https://forum.lightburnsoftware.com/t/ruida-6445-max-speed-scan-angle-45deg/8247>\
**Category:** Ruida controllers\
**Created:** [November 8, 2019, 12:38am UTC](https://forum.lightburnsoftware.com/t/ruida-6445-max-speed-scan-angle-45deg/8247 "2019-11-08T00:38:13Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![6of1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/6/58956e/32.png) [@6of1](https://forum.lightburnsoftware.com/u/6of1)\
**Post date:** [November 8, 2019, 12:38am UTC](https://forum.lightburnsoftware.com/t/ruida-6445-max-speed-scan-angle-45deg/8247/1 "2019-11-08T00:38:13Z")

</div>

When running an image scan at 45deg angle the max speed I can get is 300mm/s (even when set to 500mm/s). 0deg angle I can get 500mm/s. Where is this setting, can it be changed?

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [November 8, 2019, 2:29am UTC](https://forum.lightburnsoftware.com/t/ruida-6445-max-speed-scan-angle-45deg/8247/2 "2019-11-08T02:29:42Z")

</div>

Ruida controllers do not support rastering anything other than 0, 90, 180, and 270 optimally in hardware. Other scan angles will work, but are just done using standard cutting moves, and the controller will not be able to process them as quickly.

---

<div class="post-metadata">

**Author:** ![Sasquatch](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/sasquatch/32/126858_2.png) [@Sasquatch](https://forum.lightburnsoftware.com/u/Sasquatch)\
**Post date:** [November 13, 2019, 10:35pm UTC](https://forum.lightburnsoftware.com/t/ruida-6445-max-speed-scan-angle-45deg/8247/3 "2019-11-13T22:35:18Z")

</div>

Greetings friends,

Just curious… when you reference "scanning "does that have anything to do with the camera to “scan” the flatbed?

Thank you

---

<div class="post-metadata">

**Author:** ![Grumpy\_Old\_Man](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/grumpy_old_man/32/83_2.png) [@Grumpy\_Old\_Man](https://forum.lightburnsoftware.com/u/Grumpy_Old_Man)\
**Post date:** [November 13, 2019, 10:36pm UTC](https://forum.lightburnsoftware.com/t/ruida-6445-max-speed-scan-angle-45deg/8247/4 "2019-11-13T22:36:45Z")

</div>

No, it refers to the laser head going back and forth across the work piece. LightBurn does have a feature for using the camera to trace an image however.

---

<div class="post-metadata">

**Author:** ![Sasquatch](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/sasquatch/32/126858_2.png) [@Sasquatch](https://forum.lightburnsoftware.com/u/Sasquatch)\
**Post date:** [November 13, 2019, 10:41pm UTC](https://forum.lightburnsoftware.com/t/ruida-6445-max-speed-scan-angle-45deg/8247/5 "2019-11-13T22:41:12Z")

</div>

That makes more sense…my mind automatically associated something visual with the word “scan”

Thanx for your reply

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [December 13, 2019, 10:41pm UTC](https://forum.lightburnsoftware.com/t/ruida-6445-max-speed-scan-angle-45deg/8247/6 "2019-12-13T22:41:13Z")

</div>

Closed on December 13, 2019, 10:41pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
