# Save different settings

**URL:** <https://forum.lightburnsoftware.com/t/save-different-settings/24715>\
**Category:** Tips and Tricks\
**Tags:** material-library\
**Created:** [October 28, 2020, 10:33am UTC](https://forum.lightburnsoftware.com/t/save-different-settings/24715 "2020-10-28T10:33:45Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![andreasthaler](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/a/ebca7d/32.png) [@andreasthaler](https://forum.lightburnsoftware.com/u/andreasthaler)\
**Post date:** [October 28, 2020, 10:33am UTC](https://forum.lightburnsoftware.com/t/save-different-settings/24715/1 "2020-10-28T10:33:45Z")

</div>

Hi,  
maybe I am blind, but: Is there an option to save different cut settings in Lightburn? Eg for: engraving in plywood, engraving in acryl etc.

---

<div class="post-metadata">

**Author:** ![elvis](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/elvis/32/17780_2.png) [@elvis](https://forum.lightburnsoftware.com/u/elvis)\
**Post date:** [October 28, 2020, 11:53am UTC](https://forum.lightburnsoftware.com/t/save-different-settings/24715/2 "2020-10-28T11:53:50Z")

</div>

I don’t know I’m here learning my self but is gimp is where u would set your image in to fit the the plywood with and add on called (Da Gimpying )

---

<div class="post-metadata">

**Author:** ![andreasthaler](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/a/ebca7d/32.png) [@andreasthaler](https://forum.lightburnsoftware.com/u/andreasthaler)\
**Post date:** [October 28, 2020, 12:00pm UTC](https://forum.lightburnsoftware.com/t/save-different-settings/24715/3 "2020-10-28T12:00:25Z")

</div>

Emmm, no. I meant: Speed, Max Power, No of passes.

---

<div class="post-metadata">

**Author:** ![fred\_dot\_u](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/f/f1d935/32.png) [@fred\_dot\_u](https://forum.lightburnsoftware.com/u/fred_dot_u)\
**Post date:** [October 28, 2020, 1:46pm UTC](https://forum.lightburnsoftware.com/t/save-different-settings/24715/4 "2020-10-28T13:46:08Z")

</div>

The cut library will manage the power settings and speed. I’ve not had to use the number of passes feature, so I can’t directly advise regarding that aspect, but I would not be surprised if it stored that information.

I keep my library in the cloud, which gives one machine access for updates performed on the other.

---

<div class="post-metadata">

**Author:** ![sensor](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/sensor/32/7659_2.png) [@sensor](https://forum.lightburnsoftware.com/u/sensor)\
**Post date:** [October 28, 2020, 2:14pm UTC](https://forum.lightburnsoftware.com/t/save-different-settings/24715/5 "2020-10-28T14:14:32Z")

</div>

Bottom right of Lightburn.  
It is also possible to save the number of passes, speed power and other settings of a layer.

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/5/6/566cf10824889fa3be56dba214fe3c5c051f9ee3.png)

---

<div class="post-metadata">

**Author:** ![andreasthaler](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/a/ebca7d/32.png) [@andreasthaler](https://forum.lightburnsoftware.com/u/andreasthaler)\
**Post date:** [October 28, 2020, 3:18pm UTC](https://forum.lightburnsoftware.com/t/save-different-settings/24715/6 "2020-10-28T15:18:29Z")

</div>

Thanks!  
I was blind!

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [November 27, 2020, 3:18pm UTC](https://forum.lightburnsoftware.com/t/save-different-settings/24715/7 "2020-11-27T15:18:33Z")

</div>

Closed on November 27, 2020, 3:18pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.