# Scan Offset - not lining up on both sides?

**URL:** <https://forum.lightburnsoftware.com/t/scan-offset-not-lining-up-on-both-sides/165470>\
**Category:** LightBurn Software Questions\
**Tags:** ruida\
**Created:** [February 16, 2025, 5:41pm UTC](https://forum.lightburnsoftware.com/t/scan-offset-not-lining-up-on-both-sides/165470 "2025-02-16T17:41:13Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [February 16, 2025, 11:22pm UTC](https://forum.lightburnsoftware.com/t/scan-offset-not-lining-up-on-both-sides/165470/8 "2025-02-16T23:22:13Z")

</div>

> [@LayzarBeams](#):
>
> because what I provide for leatherwork is more about high detail

Forgot to mention this… done with a 5.5W diode on leather.

> [@Engraving Leather with 5 watt diode](https://forum.lightburnsoftware.com/t/engraving-leather-with-5-watt-diode/141205):
>
> Raster Engraving on Scratch Leather from GreatCarve Modified OLM3 with Opt Lasers PLH3D-XT-50 basic settings 4000 mm/min at 423 DPI The power varies depending on Color from 12%-30%

😺

---

_[View the full topic](https://forum.lightburnsoftware.com/t/scan-offset-not-lining-up-on-both-sides/165470)._