# Sculpfun S30 10 watt - lightburn version 1.6.03

**URL:** <https://forum.lightburnsoftware.com/t/sculpfun-s30-10-watt-lightburn-version-1-6-03/193546>\
**Category:** LightBurn Software Questions\
**Tags:** sculpfun, windows\
**Created:** [October 29, 2026, 9:51am UTC](https://forum.lightburnsoftware.com/t/sculpfun-s30-10-watt-lightburn-version-1-6-03/193546 "2026-10-29T09:51:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Onurzen07](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/o/35a633/32.png) [@Onurzen07](https://forum.lightburnsoftware.com/u/Onurzen07)\
**Post date:** [October 29, 2026, 9:51am UTC](https://forum.lightburnsoftware.com/t/sculpfun-s30-10-watt-lightburn-version-1-6-03/193546/1 "2026-10-29T09:51:01Z")

</div>

```auto

```

I am asking for your help. I have lost all of my design files, and now I am unable to engrave photographs with my laser; it either burns the material or the output doesn’t turn out as I’d like. I have a Sculpfun S30 10W machine—could you please share the settings you use to get the best results when engraving photographs?

```auto

```

I am asking for your help. I have lost all of my design files, and now I am unable to engrave photographs with my laser; it either burns the material or the output doesn’t turn out as I’d like. I have a Sculpfun S30 10W machine—could you please share the settings you use to get the best results when engraving photographs?

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [October 29, 2026, 3:18pm UTC](https://forum.lightburnsoftware.com/t/sculpfun-s30-10-watt-lightburn-version-1-6-03/193546/2 "2026-10-29T15:18:41Z")

</div>

> [@Onurzen07](#):
>
> the settings you use to get the best results when engraving photographs?

My settings would be meaningless because my images are probably not the same as yours. And my media might be tiles and yours wood.

Explain how you lost all your design files. It is possible someone might be able to help you recover them.

---

<div class="post-metadata">

**Author:** ![Onurzen07](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/o/35a633/32.png) [@Onurzen07](https://forum.lightburnsoftware.com/u/Onurzen07)\
**Post date:** [October 29, 2026, 3:26pm UTC](https://forum.lightburnsoftware.com/t/sculpfun-s30-10-watt-lightburn-version-1-6-03/193546/3 "2026-10-29T15:26:21Z")

</div>

```auto

```

A burglar broke into my house, and my PC was stolen. I’ve since moved on to a new PC, so I’m starting from scratch with nothing. I’ve been running tests for nearly five days now; I’m very close to a solution, but it’s proving to be quite a challenge. I’m hoping there might be someone else using a Sculpfun S30 10W who could share their settings—perhaps they’ll align with what I need.

```auto

```

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [October 29, 2026, 4:00pm UTC](https://forum.lightburnsoftware.com/t/sculpfun-s30-10-watt-lightburn-version-1-6-03/193546/4 "2026-10-29T16:00:43Z")

</div>

> [@Onurzen07](#):
>
> I’m hoping there might be someone else using a Sculpfun S30 10W

I have the S30 10w but like I said, the image and material will make a big difference. If you are already close, I doubt I could add anything to improve your results.

> [@Onurzen07](#):
>
> PC was stolen

Sorry to hear this, hopefully they will capture the persons responsible. Usually, the reason I hear for the loss is a PC crash or HD failure. But the response is always the same… If you have important files on your PC, save a backup copy somewhere NOT on that PC.

1. iCloud
2. Dropbox
3. Google Drive
4. OneDrive
5. NAS (network access storage) box
6. DVD ROM
7. Thumb Drive
8. A second PC

As you can see, there are a lot of options for having backup copies. But do not run Lightburn files from these options. Always load and save on your local PC, and backup when you are done.

---

<div class="post-metadata">

**Author:** ![misken](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/misken/32/47593_2.png) [@misken](https://forum.lightburnsoftware.com/u/misken)\
**Post date:** [October 29, 2026, 4:51pm UTC](https://forum.lightburnsoftware.com/t/sculpfun-s30-10-watt-lightburn-version-1-6-03/193546/5 "2026-10-29T16:51:29Z")

</div>

> [@Onurzen07](#):
>
> I’m very close to a solution, but it’s proving to be quite a challenge. I’m hoping there might be someone else using a Sculpfun S30 10W who could share their settings—perhaps they’ll align with what I need.

If you are close to it, just note them down to have a backup. Nobody can help here, since, as Mike said, the nuances you might need now will differ from workplace to workplace fundamentally.
