# Sculpfun S30 Pro w10 stuck

**URL:** <https://forum.lightburnsoftware.com/t/sculpfun-s30-pro-w10-stuck/169551>\
**Category:** Sculpfun\
**Tags:** grbl, sculpfun, sculpfun-s30\
**Created:** [April 7, 2025, 6:29pm UTC](https://forum.lightburnsoftware.com/t/sculpfun-s30-pro-w10-stuck/169551 "2025-04-07T18:29:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rinske](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/977dab/32.png) [@Rinske](https://forum.lightburnsoftware.com/u/Rinske)\
**Post date:** [April 7, 2025, 6:29pm UTC](https://forum.lightburnsoftware.com/t/sculpfun-s30-pro-w10-stuck/169551/1 "2025-04-07T18:29:24Z")

</div>

Good day,

I used my sculpfun 2 times now. But now i was engraving a picture and at some point it seems like he got stuck for a second and not starting at the same line. Now it is giving a movement in the picture but the wood did not move at all.  
Did someone experienced this issue and knows what the problem can be?

 ![IMG_9598](https://forum.lightburnsoftware.com/uploads/default/original/3X/b/6/b605742adebf630c78cf6342c7091425998a28a6.jpeg)

---

<div class="post-metadata">

**Author:** ![misken](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/misken/32/47593_2.png) [@misken](https://forum.lightburnsoftware.com/u/misken)\
**Post date:** [April 7, 2025, 7:38pm UTC](https://forum.lightburnsoftware.com/t/sculpfun-s30-pro-w10-stuck/169551/2 "2025-04-07T19:38:25Z")

</div>

Check the mechanics closely first. Here is a guide covering most of it:

> **[Guide to mechanical adjustments and maintenance](https://diode-laser-wiki.com/documentation/guide-to-mechanical-adjustments/)**
>
> Guide to mechanical adjustments and maintenance A short guide on how to adjust and do maintenance of the mechanical setup of the laser.
