# Setting fill in lines

**URL:** <https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542>\
**Category:** LightBurn Software Questions\
**Created:** [March 30, 2021, 2:45pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542 "2021-03-30T14:45:34Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![rls46224](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/a88e4f/32.png) [@rls46224](https://forum.lightburnsoftware.com/u/rls46224)\
**Post date:** [March 30, 2021, 2:45pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/1 "2021-03-30T14:45:34Z")

</div>

I created a design with circles and lines, I was able to get my circles to fill but can’t figure out how to make my lines fill to make a solid line. I want them to be .125" finished.

 ![20210330_103952](https://forum.lightburnsoftware.com/uploads/default/original/3X/c/7/c7600781ae25b29ce12af4abd743463864f84e4d.jpeg)

---

<div class="post-metadata">

**Author:** ![rls46224](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/a88e4f/32.png) [@rls46224](https://forum.lightburnsoftware.com/u/rls46224)\
**Post date:** [March 30, 2021, 5:13pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/3 "2021-03-30T17:13:35Z")

</div>

I can get the shape drawn but how do I connect the lines?

 ![16171243809482464896581578510972](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/6/16e036ef2a0778e869a43809ec9c89815e2082e3.jpeg)

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [March 30, 2021, 5:22pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/4 "2021-03-30T17:22:18Z")

</div>

Based on what you are showing, you would need to edit out the section of the outer circle, between the 2 parallel lines.

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/4/0/40bcc7d536b8181d1e650424cd6a68fa38d27e3c.png)

---

<div class="post-metadata">

**Author:** ![rls46224](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/a88e4f/32.png) [@rls46224](https://forum.lightburnsoftware.com/u/rls46224)\
**Post date:** [March 30, 2021, 5:43pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/5 "2021-03-30T17:43:33Z")

</div>

I need more detailed info on how to do this as I am new to doing this type of design.

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [March 30, 2021, 6:03pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/7 "2021-03-30T18:03:33Z")

</div>

I can provide some general info, but detailed instructions or a suggested workflow would require a better understanding of how your final resulting work will appear. I simply used the ‘Edit Nodes’ to remove the unwanted section and joined the paths to complete.

Show us how you want the result to look, and we can offer some suggestions.

---

<div class="post-metadata">

**Author:** ![rls46224](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/a88e4f/32.png) [@rls46224](https://forum.lightburnsoftware.com/u/rls46224)\
**Post date:** [March 30, 2021, 11:27pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/8 "2021-03-30T23:27:55Z")

</div>

I draw my circle like you’d then draw my intersecting lines to it but when I go to Edit Nodes and highlight the corners I don’t know how to remove the connecting line to make it one object.

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [March 30, 2021, 11:48pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/9 "2021-03-30T23:48:18Z")

</div>

Hover over the ‘Edit Nodes’ and hit ‘F1’. LightBurn will pop open a browser window and take you to the appropriate page in our documentation for more on the subject. [Node Editing - LightBurn Software Documentation](https://lightburnsoftware.github.io/NewDocs/EditNodes.html)

![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/7/c/7ceb5e7f049b65bd55a51f5632a49242121b661e.png)

---

<div class="post-metadata">

**Author:** ![rls46224](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/a88e4f/32.png) [@rls46224](https://forum.lightburnsoftware.com/u/rls46224)\
**Post date:** [March 31, 2021, 7:45pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/11 "2021-03-31T19:45:22Z")

</div>

RalphU. Thanks so very much as that was what I needed. My design was a little different but it worked. Now my question is how to get my fill out of the center and into the lines.

 ![16172198956825866264914269620333](https://forum.lightburnsoftware.com/uploads/default/original/3X/9/8/98a8afca7043f0676087ac96cb6161e5067264e0.jpeg)

---

<div class="post-metadata">

**Author:** ![rls46224](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/a88e4f/32.png) [@rls46224](https://forum.lightburnsoftware.com/u/rls46224)\
**Post date:** [March 31, 2021, 7:56pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/12 "2021-03-31T19:56:31Z")

</div>

This is how it looks with just line.

 ![16172205685606441719969168068867](https://forum.lightburnsoftware.com/uploads/default/original/3X/c/e/ce233bcb5bf05b04493d5458d6254889348101f3.jpeg)

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [March 31, 2021, 8:03pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/13 "2021-03-31T20:03:30Z")

</div>

This might help in understanding how LightBurn determines what to fill using the boundaries of each shape to toggle the fill on and off. You need another bounding shape to fill the center circles the way you’d like.

> [@How do I invert (negate) a vector engraving?](https://forum.lightburnsoftware.com/t/how-do-i-invert-negate-a-vector-engraving/594):
>
> If you want to invert a vector engraving (Fill layer) you need to add an outline to it. Think about what happens when you scan a circle, compared to the letter ‘O’. The inner ring of the O toggles the fill. If you add another shape (like a square) outside it, it negates the whole thing: And a slightly different example, this time done by changing the outer line around the design to a ‘Line’, instead of leaving it as part of the Fill layer: In the case above, the design alr…

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [April 30, 2021, 8:04pm UTC](https://forum.lightburnsoftware.com/t/setting-fill-in-lines/37542/14 "2021-04-30T20:04:04Z")

</div>

Closed on April 30, 2021, 8:04pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
