# Snapmaker 2.0 non-fire issue?

**URL:** <https://forum.lightburnsoftware.com/t/snapmaker-2-0-non-fire-issue/128830>\
**Category:** Snapmaker\
**Created:** [February 9, 2024, 5:16am UTC](https://forum.lightburnsoftware.com/t/snapmaker-2-0-non-fire-issue/128830 "2024-02-09T05:16:46Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![Colin](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/colin/32/41542_2.png) [@Colin](https://forum.lightburnsoftware.com/u/Colin)\
**Post date:** [February 9, 2024, 5:16am UTC](https://forum.lightburnsoftware.com/t/snapmaker-2-0-non-fire-issue/128830/1 "2024-02-09T05:16:46Z")

</div>

Hi Snapmaker users,

We’ve seen a couple recent Support tickets come in with 2.0 users claiming that motion control works, but the laser does not fire. We’ve seen this in the past

> [@Snapmaker Laser will not turn on](https://forum.lightburnsoftware.com/t/snapmaker-laser-will-not-turn-on/36021):
>
> The laser will not turn on. The head moves but no burn. Enclosure doors are closed. Laser works with Luban generated file. Gcode is transfered using USB Toggle.

If you’re experiencing this with the recent 1.5.00 or 1.5.01 releases, please let us know in a reply to this topic. Thanks!

---

_[View the full topic](https://forum.lightburnsoftware.com/t/snapmaker-2-0-non-fire-issue/128830)._
