# Software download for Ruida controller

**URL:** <https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433>\
**Category:** LightBurn Software Questions\
**Tags:** ruida, update\
**Created:** [October 24, 2026, 3:40am UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433 "2026-10-24T03:40:57Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![hawst](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/h/35a633/32.png) [@hawst](https://forum.lightburnsoftware.com/u/hawst)\
**Post date:** [October 24, 2026, 3:40am UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433/1 "2026-10-24T03:40:57Z")

</div>

I have just “inherited” a CO2 laser. it is a Sinmic SL1390 with a controller board labelled RDC6442S(EC). I have upgraded to Lightburn Pro (Already have diode lasers which I am very familiar with) to use the RuiDa drivers, but although my Windows10 PC sees the laser through the USB cable, it won’t communicate with it. I have downloaded and installed RD Works as well as other Ruida drivers but they don’t seem to work. I understand Lightburn has an available driver that is compatible; can I download it please?

---

<div class="post-metadata">

**Author:** ![sutick](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/e274bd/32.png) [@sutick](https://forum.lightburnsoftware.com/u/sutick)\
**Post date:** [October 24, 2026, 11:40am UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433/2 "2026-10-24T11:40:32Z")

</div>

Just Re-Run the LightBurn installer, and on the last page check the box to install the FTDI driver. That is the driver that’s needed to communicate with a Ruida controller over USB.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [October 24, 2026, 11:52am UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433/3 "2026-10-24T11:52:05Z")

</div>

> [@hawst](#):
>
> an available driver that is compatible

Likely the CH340 driver.

If you’re feeling lucky today:

> [@Unable to connect and get started and can't seem to find this problem on any forms frowning](https://forum.lightburnsoftware.com/t/unable-to-connect-and-get-started-and-cant-seem-to-find-this-problem-on-any-forms/49444/2):
>
> you have to install drivers, COM1 is really system reserved download them from here… is ch340 serial/usb driver or this one if the prev doesn’t work as expected [https://sparks.gogo.co.nz/ch340.html](https://sparks.gogo.co.nz/ch340.html) once you have installed drivers plug in your laser and go to device manager under com port to see which is the serial/usb

You can, however, avoid an unlimited amount of USB heartache & confusion by using the controller’s Ethernet interface:

> **[Connect to a Ruida or Trocen Laser via Ethernet - LightBurn User Guide](https://docs.lightburnsoftware.com/2.2/Guides/RuidaEthernet/)**
>
> Learn to connect to a DSP laser such as Ruida or Trocen via ethernet using LightBurn.

A direct Ethernet connection between the PC and the laser will get you running right away.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [October 24, 2026, 6:48pm UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433/4 "2026-10-24T18:48:40Z")

</div>

Might take a look here, from Laser Everything.. [EASY! Swap Between LightBurn and Ezcad FAST](https://Skip%20navigation%20Create%20Avatar%20image%20EASY!%20Swap%20Between%20LightBurn%20and%20Ezcad%20FAST)

You can see the driver reported to Windows, but it may not be the right driver for Lightburn.

😺

---

<div class="post-metadata">

**Author:** ![Rick292](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick292/32/123506_2.png) [@Rick292](https://forum.lightburnsoftware.com/u/Rick292)\
**Post date:** [October 24, 2026, 9:30pm UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433/5 "2026-10-24T21:30:50Z")

</div>

FYI my Ruida is far more stable using ethernet than USB. Had to get some help configuring it.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [October 25, 2026, 9:23pm UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433/6 "2026-10-25T21:23:28Z")

</div>

Within a couple of weeks with a new laser, I bailed out of using USB and went to Ethernet. What a relief. I bought a low cost router/bridge from Amazon it works fine with my co2 out in the garage. Lightburn makes a similar bridge that I have used, but the PI just doesn’t appear to be as tough as my my Chinese built T-link bridge, when thunderstorms are involved.

I agree with anyone who suggests the same, if that’s any consulatioin?

😺

---

<div class="post-metadata">

**Author:** ![hawst](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/h/35a633/32.png) [@hawst](https://forum.lightburnsoftware.com/u/hawst)\
**Post date:** [October 26, 2026, 3:22am UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433/7 "2026-10-26T03:22:54Z")

</div>

Hi people, thanks for all your help and suggestions. I’ll have another go, but I’ll try ethernet this time. it should be able to handle the extra load that a CO2 laser will put on it. Will keep you posted…

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [October 26, 2026, 11:55am UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433/8 "2026-10-26T11:55:29Z")

</div>

> [@hawst](#):
>
> handle the extra load that a CO2 laser will put on it

Data is not the problem.

The fragility of a USB electrical connection is the problem and it is a _real_ problem. ☹

---

<div class="post-metadata">

**Author:** ![hawst](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/h/35a633/32.png) [@hawst](https://forum.lightburnsoftware.com/u/hawst)\
**Post date:** [November 2, 2026, 11:23am UTC](https://forum.lightburnsoftware.com/t/software-download-for-ruida-controller/193433/9 "2026-11-02T11:23:12Z")

</div>

Hi. I finally got back in my shed, and changed from USB to Ethernet. Thanks for all your comments, I now have everything up and going. it’s so efficient, I probably won’t be going back to my diode laser anytime soon.

So glad to have this forum …
