# SOLVED: FIX for "Weird dots all over my engraving"

**URL:** <https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131>\
**Category:** LightBurn Software Questions\
**Created:** [December 20, 2024, 2:54am UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131 "2024-12-20T02:54:18Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Design8Studio.com](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/design8studio.com/32/61358_2.png) [@Design8Studio.com](https://forum.lightburnsoftware.com/u/Design8Studio.com)\
**Post date:** [December 20, 2024, 2:54am UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/1 "2024-12-20T02:54:19Z")

</div>

My JPG image has a pure white back ground **[update: I only thought it was pure white. It was supposed to be, but CorelDRAW has a problem, see below, starting with @artistseth’s post [here](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/8), and my reply below it.]**:

 ![Screenshot 2024-12-19 at 9.40.09 PM](https://forum.lightburnsoftware.com/uploads/default/original/3X/8/e/8e38c2028b24da67b2fd60efbf73897d3ab64cb8.jpeg)

…Yet LB wanted to add weird dots every where (see preview window below):

 ![Screenshot 2024-12-19 at 9.39.43 PM](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/8/a8d9ac4330dfb17dba74f4e2c66ea0faee053d87.jpeg)

At first I thought maybe the JPG file had pixels outputted from CorelDRAW that were slightly less than white, maybe a little gray, as a result of JPG compression (aka artifacts), and that this was being magnified by LB, so, even though an inspection of the JPG did not reveal JPG artifacts, still I outputted a PNG file instead, which got the same result.

Finally, I switched the Image Mode from “Dither” to “Threshold”:

 ![Screenshot 2024-12-19 at 9.45.50 PM](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/5/a5460a47ccb606c8a250255faffe6c6ab916a911.jpeg)

…and that got the desired result:

 ![Screenshot 2024-12-19 at 9.46.09 PM](https://forum.lightburnsoftware.com/uploads/default/original/3X/b/0/b0107c24ecc9d1148428bfd373249a05e112c997.jpeg)

Overall, I’m glad I found a workaround, but this seems like a bug or glitch, as the LB program is outputting dots where there are no dots in the source file.

Hope this helps someone.

---

<div class="post-metadata">

**Author:** ![RalphU](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ralphu/32/42743_2.png) [@RalphU](https://forum.lightburnsoftware.com/u/RalphU)\
**Post date:** [December 20, 2024, 3:02am UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/2 "2024-12-20T03:02:25Z")

</div>

Can you post your JPG file?

---

<div class="post-metadata">

**Author:** ![Design8Studio.com](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/design8studio.com/32/61358_2.png) [@Design8Studio.com](https://forum.lightburnsoftware.com/u/Design8Studio.com)\
**Post date:** [December 20, 2024, 3:03am UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/3 "2024-12-20T03:03:22Z")

</div>

> [@RalphU](#):
>
> post your JPG file?

The JPG:

 ![Cutting Board for Madison w Recipe by Betty Mimi Murphy (normal)](https://forum.lightburnsoftware.com/uploads/default/original/3X/0/8/0896c4bd14d6b0a74b2a41acdec923d5dee442a7.jpeg)

The PNG:

 ![Cutting Board for Madison w Recipe by Betty Mimi Murphy (normal)](https://forum.lightburnsoftware.com/uploads/default/original/3X/c/1/c1f7aacf166fde6e0b52da28b31d57b81981c054.jpeg)

---

<div class="post-metadata">

**Author:** ![Design8Studio.com](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/design8studio.com/32/61358_2.png) [@Design8Studio.com](https://forum.lightburnsoftware.com/u/Design8Studio.com)\
**Post date:** [December 20, 2024, 3:06am UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/4 "2024-12-20T03:06:36Z")

</div>

My version of LB:

 ![Screenshot 2024-12-19 at 10.06.09 PM](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/8/e8c4578e4f757ae95a047cea6cfc851916364487.png)

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [December 20, 2024, 3:06am UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/5 "2024-12-20T03:06:43Z")

</div>

A quick Google turned up this. It relates to color images with a limited pallet, but I think the algorithm may monkey with B/W images too. **Bold** is mine…

> simulate shades that aren’t available in the limited palette, resulting in a smoother appearance and preventing harsh banding, especially when reducing an image’s color depth; **essentially, it adds a controlled amount of “noise” to the image** that the human eye perceives as a blended color.

---

<div class="post-metadata">

**Author:** ![Design8Studio.com](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/design8studio.com/32/61358_2.png) [@Design8Studio.com](https://forum.lightburnsoftware.com/u/Design8Studio.com)\
**Post date:** [December 20, 2024, 3:10am UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/6 "2024-12-20T03:10:38Z")

</div>

I was outputting grayscale (8 bit), but just now also tried RGB (24 bit) and that did not help. These are being outputted from CorelDRAW 2023.

---

<div class="post-metadata">

**Author:** ![Dskall](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/b5e925/32.png) [@Dskall](https://forum.lightburnsoftware.com/u/Dskall)\
**Post date:** [December 20, 2024, 5:02am UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/7 "2024-12-20T05:02:26Z")

</div>

I kind of like it. Adds sort of a 3D effect.

---

<div class="post-metadata">

**Author:** ![artistseth](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/artistseth/32/94020_2.png) [@artistseth](https://forum.lightburnsoftware.com/u/artistseth)\
**Post date:** [December 20, 2024, 3:40pm UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/8 "2024-12-20T15:40:03Z")

</div>

> [@Design8Studio.com](#):
>
> At first I thought maybe the JPG file had pixels outputted from CorelDRAW that were slightly less than white, maybe a little gray, as a result of JPG compression (aka artifacts), and that this was being magnified by LB, so, even though an inspection of the JPG did not reveal that,

You were correct. The circular portion of your image is using a 99% white. I will post it with the pure white removed. Everything remaining is only 99%, and is being dithered.

 ![c1f7aacf166fde6e0b52da28b31d57b81981c054_2_1000x1000](https://forum.lightburnsoftware.com/uploads/default/original/3X/b/b/bb7344ec9ca55c5a223d5f459621c7c28dc8d820.jpeg)

---

<div class="post-metadata">

**Author:** ![Design8Studio.com](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/design8studio.com/32/61358_2.png) [@Design8Studio.com](https://forum.lightburnsoftware.com/u/Design8Studio.com)\
**Post date:** [December 20, 2024, 4:33pm UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/9 "2024-12-20T16:33:04Z")

</div>

You are correct! This “moves” the software issue _from_ LB to CorelDRAW. I just checked my source work in CorelDRAW, and the default color palette is CMYK, but the real problem is that a CMYK value of 0,0,0,0 has its corresponding RGB value set _not_ to 255, 255, 255, but rather 254, 254, 254, thus a very very light gray, but not pure white. This is very frustrating to me, but at least you helped me find the real culprit here.

---

<div class="post-metadata">

**Author:** ![Design8Studio.com](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/design8studio.com/32/61358_2.png) [@Design8Studio.com](https://forum.lightburnsoftware.com/u/Design8Studio.com)\
**Post date:** [December 20, 2024, 4:45pm UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/10 "2024-12-20T16:45:13Z")

</div>

And as a final note on this, in CorelDRAW, going to Tools \> Color Management, and switching the default color palette from CMYK to RGB, means that clicking White in the palette to apply a fill, results in a pure white, 255, 255, 255, which then corresponds to CMYK of 0,0,0,0 — which is what I would have expected to happen when going the opposite direction (from CMYK to RGB) as well. But now I’m on a default that works as I would have expected! Learn something new every day.

---

<div class="post-metadata">

**Author:** ![artistseth](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/artistseth/32/94020_2.png) [@artistseth](https://forum.lightburnsoftware.com/u/artistseth)\
**Post date:** [December 20, 2024, 4:55pm UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/11 "2024-12-20T16:55:29Z")

</div>

Also fyi, since “threshold” only works for images you want to posterize, issues similar to this can usually be resolved by increasing the “contrast” setting, which pushes the 99% white up into the pure white range.

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [December 20, 2024, 6:06pm UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/12 "2024-12-20T18:06:49Z")

</div>

I only adjusted your image in Lightburn  
And here is a preview with Dither Mode:

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/f/1/f11a25e56b7d25099734f1acab493d335c1be420.png)

---

<div class="post-metadata">

**Author:** ![Design8Studio.com](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/design8studio.com/32/61358_2.png) [@Design8Studio.com](https://forum.lightburnsoftware.com/u/Design8Studio.com)\
**Post date:** [December 20, 2024, 6:18pm UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/13 "2024-12-20T18:18:20Z")

</div>

More than one way to skin this cat!

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [January 19, 2025, 6:19pm UTC](https://forum.lightburnsoftware.com/t/solved-fix-for-weird-dots-all-over-my-engraving/160131/14 "2025-01-19T18:19:07Z")

</div>

Closed on January 19, 2025, 6:19pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
