# Struggling to get lightburn to connect atomstack m4

**URL:** <https://forum.lightburnsoftware.com/t/struggling-to-get-lightburn-to-connect-atomstack-m4/154068>\
**Category:** Atomstack\
**Tags:** windows10, fiber-galvo, atomstack-m4-galvo, windows, atomstack\
**Created:** [October 20, 2024, 1:39pm UTC](https://forum.lightburnsoftware.com/t/struggling-to-get-lightburn-to-connect-atomstack-m4/154068 "2024-10-20T13:39:24Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tombridge](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/t/0ea827/32.png) [@Tombridge](https://forum.lightburnsoftware.com/u/Tombridge)\
**Post date:** [October 20, 2024, 1:39pm UTC](https://forum.lightburnsoftware.com/t/struggling-to-get-lightburn-to-connect-atomstack-m4/154068/1 "2024-10-20T13:39:24Z")

</div>

I’m running 1.701 with the galvo compatibility Windows 10 pro The laser is enjoywood m4 (which is a clone of the atomstack m4) I’ve installed the ezcad2 driver with the lightburn installer although for it to show up i switched it to winusb, using zadig driver utility.

It’s showing up under the USB devices section in device manager. It just doesn’t show up when i click “find my laser” i have tried creating my own preset using the bslfiber option but to no avail.

I can disable the current driver so its then detected under a com port on the pc but that doesn’t help me get it connected in lightburn.

I have also tried multiple versions of lightburn 1.7.00, 1.7,02 etc and still no luck.

---

<div class="post-metadata">

**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\
**Post date:** [October 20, 2024, 3:03pm UTC](https://forum.lightburnsoftware.com/t/struggling-to-get-lightburn-to-connect-atomstack-m4/154068/2 "2024-10-20T15:03:42Z")

</div>

Hi Tom

Could you show us how the M4 is detected in Device manager.

I was certain the M4 was a BSL and not a EZCad driven laser.  
If i am right, you need the native drivers, not replace them with Zadig

---

<div class="post-metadata">

**Author:** ![Tombridge](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/t/0ea827/32.png) [@Tombridge](https://forum.lightburnsoftware.com/u/Tombridge)\
**Post date:** [October 20, 2024, 3:52pm UTC](https://forum.lightburnsoftware.com/t/struggling-to-get-lightburn-to-connect-atomstack-m4/154068/3 "2024-10-20T15:52:33Z")

</div>

i have uninstalled that drivers, its now displayed under the ‘universal serial devices’ tab and is called ‘sea-laser’ i clicked to see what driver it has and its called ‘libwdi’

---

<div class="post-metadata">

**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\
**Post date:** [October 20, 2024, 4:02pm UTC](https://forum.lightburnsoftware.com/t/struggling-to-get-lightburn-to-connect-atomstack-m4/154068/4 "2024-10-20T16:02:03Z")

</div>

Usually they are called “Cypress”, but that should work.

You could now try to add manually \> BSL

On your software package from the manufacturer do you have a BSL.cfg file you can use on the importer?

---

<div class="post-metadata">

**Author:** ![Tombridge](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/t/0ea827/32.png) [@Tombridge](https://forum.lightburnsoftware.com/u/Tombridge)\
**Post date:** [October 20, 2024, 4:40pm UTC](https://forum.lightburnsoftware.com/t/struggling-to-get-lightburn-to-connect-atomstack-m4/154068/5 "2024-10-20T16:40:26Z")

</div>

I’ve tried that and it still displays ‘disconnected’ no movement from the laser either even after creating that profile with the cfg file

---

<div class="post-metadata">

**Author:** ![Tombridge](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/t/0ea827/32.png) [@Tombridge](https://forum.lightburnsoftware.com/u/Tombridge)\
**Post date:** [October 20, 2024, 4:54pm UTC](https://forum.lightburnsoftware.com/t/struggling-to-get-lightburn-to-connect-atomstack-m4/154068/6 "2024-10-20T16:54:55Z")

</div>

I have just checked, and its now showing up under (com15) but as i understand bsl lasers dont use com ports? so maybe i need a different driver other than ‘libwdi’

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [November 19, 2024, 4:55pm UTC](https://forum.lightburnsoftware.com/t/struggling-to-get-lightburn-to-connect-atomstack-m4/154068/7 "2024-11-19T16:55:02Z")

</div>

Closed on November 19, 2024, 4:55pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
