# Support for IO control similar to EZCad

**URL:** <https://forum.lightburnsoftware.com/t/support-for-io-control-similar-to-ezcad/71814>\
**Category:** Galvo\
**Tags:** galvo, ezcad-2\
**Created:** [July 19, 2022, 7:56pm UTC](https://forum.lightburnsoftware.com/t/support-for-io-control-similar-to-ezcad/71814 "2022-07-19T19:56:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rv8r](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/7feea3/32.png) [@rv8r](https://forum.lightburnsoftware.com/u/rv8r)\
**Post date:** [July 19, 2022, 7:56pm UTC](https://forum.lightburnsoftware.com/t/support-for-io-control-similar-to-ezcad/71814/1 "2022-07-19T19:56:35Z")

</div>

I’m currently utilizing the IO in EZCad to control external automation on our 60W Fiber. Would love to see the ability to have IO control within the layer stack to allow for multiple image engraving in the same program. (Or allow multiple file engraving another way.)

 ![ezcad io screen shot](https://forum.lightburnsoftware.com/uploads/default/original/3X/d/6/d6c383363d5e45ab8d68608f0cd9a34c7ca8f2c1.png)

[Robot Galvo Video Example](https://www.dropbox.com/s/4zhdo7cgi91ag6u/IMG_0084.mp4?dl=0)

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [August 18, 2022, 7:57pm UTC](https://forum.lightburnsoftware.com/t/support-for-io-control-similar-to-ezcad/71814/2 "2022-08-18T19:57:21Z")

</div>

Closed on August 18, 2022, 7:57pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
