Hi there, I’m completely new to laser engraving. Just set up my Snapmaker for laser and taking the first steps. One scary thing happened today. I started a print via USB with Lightburn and then left the room. The movement of the laser stopped, but the laser was still on power, burning a hole in the…

The solution is here: [image] Snapmaker job fails after one cut on M8, M9 unknown command errors Snapmaker This seems to be the solution, it’s from brent113 from the Snapmaker Forum. I can confirm it’s working! I figured it out. Someone (maybe you) mentioned they suspect…

A friend from the Snapmaker forum wrote that to me: My guess is Lightburn is not honoring the serial buffer being full, and just sending commands anyways. But the controller isn’t receiving them. So Lightburn thinks it sent the whole program, but the controller hasn’t heard all of it. Then the con…

Hi @FlyByWire , the support to Snapmaker is not robust jet. Nevertheless, according to another user, some issues should be solved in the next software update. Have a look to this post https://forum.lightburnsoftware.com/t/snapmaker-job-fails-after-one-cut-on-m8-m9-unknown-command-errors/24151/6 I’v…

Tool movement stopping while laser still on

Resources Common Problems

FlyByWire (FlyByWire) November 2, 2020, 5:31pm 4

The solution is here: