# После часа гравировки станок останавливается

**URL:** <https://forum.lightburnsoftware.com/t/topic/164068>\
**Category:** NEJE\
**Tags:** neje\
**Created:** [January 31, 2025, 7:55pm UTC](https://forum.lightburnsoftware.com/t/topic/164068 "2025-01-31T19:55:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andrey2](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/a/50afbb/32.png) [@Andrey2](https://forum.lightburnsoftware.com/u/Andrey2)\
**Post date:** [January 31, 2025, 7:55pm UTC](https://forum.lightburnsoftware.com/t/topic/164068/1 "2025-01-31T19:55:08Z")

</div>

Всем привет,станок neje гравирует 1 час и останавливается,в чем проблема?

> Hi all,neje machine engraves for 1 hour and stops,what is the problem?

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [February 3, 2025, 11:24pm UTC](https://forum.lightburnsoftware.com/t/topic/164068/2 "2025-02-03T23:24:02Z")

</div>

Congrats and welcome, glad you found Lightburn and this forum.

What Neje model?  
Did you make any updates?  
Can you try the problematic project with 1% power to check if it goes till the end?  
Report back with your findings.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [March 5, 2025, 11:24pm UTC](https://forum.lightburnsoftware.com/t/topic/164068/3 "2025-03-05T23:24:51Z")

</div>

Closed on March 5, 2025, 11:24pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
