# Trouble with Acmer Rotary

**URL:** <https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867>\
**Category:** LightBurn Hardware Compatibility\
**Created:** [April 9, 2024, 4:32pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867 "2024-04-09T16:32:39Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![rcdoyal](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/258eb7/32.png) [@rcdoyal](https://forum.lightburnsoftware.com/u/rcdoyal)\
**Post date:** [April 9, 2024, 4:32pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/1 "2024-04-09T16:32:39Z")

</div>

Has anyone on here successfully used the Acmer M2 rotary roller?  
I keep getting Alarm 2 error.

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [April 9, 2024, 7:24pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/2 "2024-04-09T19:24:29Z")

</div>

What’s happening with the roller?  
Type $# in the console window and post the output here.

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [April 9, 2024, 8:33pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/3 "2024-04-09T20:33:55Z")

</div>

> [@rcdoyal](#):
>
> rotary roller?  
> I keep getting Alarm 2 error

Alarm 2 is over-travel. Disable the **$20** soft limits parameter.  
BECAUSE, there is no home switch on the rotary and it can rotate forever without hitting a limit.

Just don’t forget to turn it back on when you turn off the rotary, I set a couple of Console macro buttons to “Yaxis Mode” and “Rotary Mode” to change the parameter for me.

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [April 9, 2024, 9:17pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/4 "2024-04-09T21:17:07Z")

</div>

Sorry misunderstood the questions.  
Treated them as two separate issues.

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [April 10, 2024, 3:37pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/5 "2024-04-10T15:37:39Z")

</div>

> [@parsec](#):
>
> Sorry

Don’t apologize for trying to help someone. I see your name enough to know you are a good helper.

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [April 10, 2024, 3:51pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/6 "2024-04-10T15:51:56Z")

</div>

English is not my mother tongue. Sometimes my understanding slips, even sometimes my perception of something that I later realize was not what I had perceived.  
In this case, the title and the questions should have tingled my brain and they didn’t.  
Thanks.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [April 10, 2024, 5:38pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/7 "2024-04-10T17:38:27Z")

</div>

> [@MikeyH](#):
>
> home switch on the rotary and it can rotate forever

This always causes issues. It really isn’t correct … It can rotate for ever, but it’s position will eventually be lost by the controller.

The controller loses where it is when it exceeds the maximum value, internally, of where it is. It rolls over to zero, at that point it’s doesn’t really know if this is the first or 5th time it’s rolled over…

If you move it to where the machine thinks is within the work area these errors will go away.

This is most likely a misunderstanding of how the coordinate system is applied to a rotary… from a machines view, it’s the same as with a table. If you did the same positioning on a table, you’d get the same error.

> [@MikeyH](#):
>
> Disable the **$20** soft limits parameter

I don’t suggest you remove any normal protections you are currently using. It would greatly behoove you to figure out how this is occurring and understand the real problem. It’ll come about again if you don’t, worst case, you’ll recognize the issue in a second…

Good luck

😸

---

<div class="post-metadata">

**Author:** ![rcdoyal](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/258eb7/32.png) [@rcdoyal](https://forum.lightburnsoftware.com/u/rcdoyal)\
**Post date:** [April 10, 2024, 8:29pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/8 "2024-04-10T20:29:48Z")

</div>

![Screenshot (1)](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/d/ed589b201457529246a7f39d74390010a0d6775e.jpeg)

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [April 10, 2024, 9:49pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/9 "2024-04-10T21:49:09Z")

</div>

Enable cut selected graphics  
And use selection origin  
 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/b/9/b9427b9ec6fcf4e9c6857fe457cb3805f6ec2c1f.png)

---

<div class="post-metadata">

**Author:** ![rcdoyal](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/258eb7/32.png) [@rcdoyal](https://forum.lightburnsoftware.com/u/rcdoyal)\
**Post date:** [April 10, 2024, 10:03pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/10 "2024-04-10T22:03:16Z")

</div>

Will I need to change those back when I’m done with rotary?

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [April 10, 2024, 10:10pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/11 "2024-04-10T22:10:06Z")

</div>

These settings in the laser window are for you to control the actual job run.

If you’re using all the graphics, there’s no advantage and no difference to using cut _ **selected graphics/use selection origin** _

He should have posted all the controls available on this part of the laser window, at least to include the _ **start from** _ pull-down… All of these affect how the job is interpreted and sent to the machine.

Might want to re-fresh yourself

> **[Coordinates & Origin - LightBurn Documentation](https://docs.lightburnsoftware.com/CoordinatesOrigin.html)**
>
> Better software for laser cutters.

😸

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [April 10, 2024, 10:11pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/12 "2024-04-10T22:11:06Z")

</div>

It depends on the origin you usually use.  
If Absolute Coordinates **Use Selection Origin** gets grayed.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [April 10, 2024, 10:21pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/13 "2024-04-10T22:21:16Z")

</div>

They are all connected to how the job is created and executed… There is no reason for a job origin as it’s specified as 0, 0 if you run absolute coordinates…

I run my mugs similar to those settings… I only have a single graphic, so no reason for messing with selections options.

I set the _ **origin** _, from the console, use _ **job origin** _ at the 9 o’clock position and set _ **start from** _ to _ **user origin** _.

He needs to take some time to get a handle on how these work or they will follow him, creating grief, throughout his laser life…

Run some jobs and ask questions if you don’t get it… it’s not osmosis, so you need to ask before you get frustrated…

😸

---

<div class="post-metadata">

**Author:** ![rcdoyal](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/258eb7/32.png) [@rcdoyal](https://forum.lightburnsoftware.com/u/rcdoyal)\
**Post date:** [April 11, 2024, 2:41am UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/14 "2024-04-11T02:41:52Z")

</div>

You are so correct. I need to really understand the origins and how they affect things. I made the two changes suggested by the other poster and nothing changed. Still got the 2 error.

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [April 11, 2024, 4:44pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/15 "2024-04-11T16:44:56Z")

</div>

After digging in the P2 manual did you switch to R?

 ![rotary switch](https://forum.lightburnsoftware.com/uploads/default/original/3X/f/7/f797f11c9d2ca4fee0ffea7b8a8e521362ab64f3.png)

---

<div class="post-metadata">

**Author:** ![rcdoyal](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/258eb7/32.png) [@rcdoyal](https://forum.lightburnsoftware.com/u/rcdoyal)\
**Post date:** [April 11, 2024, 4:58pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/16 "2024-04-11T16:58:15Z")

</div>

I solved all problems today and it is working beautifully.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [April 11, 2024, 5:23pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/17 "2024-04-11T17:23:25Z")

</div>

The purpose of these posts are to assist others, after you, with the same or similar issues…

The _ **I got it fixed** _ response, doesn’t help anyone know what the correct fix was.

😸

---

<div class="post-metadata">

**Author:** ![rcdoyal](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/258eb7/32.png) [@rcdoyal](https://forum.lightburnsoftware.com/u/rcdoyal)\
**Post date:** [April 11, 2024, 5:54pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/18 "2024-04-11T17:54:17Z")

</div>

Sorry about that. I think it was just using current position instead of absolute coordinates.

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [April 11, 2024, 6:52pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/19 "2024-04-11T18:52:28Z")

</div>

It was already in Current Position in your picture.  
Simple question: didn`t find a manual on the Acmer site only a video did the roller came with a manual?  
Cause both my roller and chuck came with manuals

---

<div class="post-metadata">

**Author:** ![rcdoyal](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/258eb7/32.png) [@rcdoyal](https://forum.lightburnsoftware.com/u/rcdoyal)\
**Post date:** [April 11, 2024, 7:15pm UTC](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867/20 "2024-04-11T19:15:43Z")

</div>

Once you make a certain change it defauts back to absolute. I think i kept forgetting to reset it.  
There is no Acmer manual anywhere with more than basic info.

[Next page](https://forum.lightburnsoftware.com/t/trouble-with-acmer-rotary/135867.md?page=2)
