berainlb
February 28, 2023, 3:21pm
2
Have you looked through this Topic that walks through the setup for Snapmaker? Read through the whole thing as there’s an important update in the last post.
Hi all,
As suggested by @jlropes here is rough guide which I hope will help other users to get their Snapmaker 2.0’s working with Lightburn Software.
First steps with a freshly powered on SM2 is to use the calibration method in the controller taking into account the material thickness and the automated focusing and that sets a focus height that’s referenced in machine Z co-ordinate. Then set working co-ordinates X&Y to suit and that then refers to your bottom left reference in Lightburn.
By d…