# What is happening here?

**URL:** <https://forum.lightburnsoftware.com/t/what-is-happening-here/118320>\
**Category:** Community Laser Talk\
**Tags:** ruida, omtech-60w, image\
**Created:** [November 28, 2023, 1:32am UTC](https://forum.lightburnsoftware.com/t/what-is-happening-here/118320 "2023-11-28T01:32:54Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![BoneM4nwalkin](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/b4bc9f/32.png) [@BoneM4nwalkin](https://forum.lightburnsoftware.com/u/BoneM4nwalkin)\
**Post date:** [November 28, 2023, 1:32am UTC](https://forum.lightburnsoftware.com/t/what-is-happening-here/118320/1 "2023-11-28T01:32:54Z")

</div>

![IMG_20231127_180426](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/0/106553a217974f0edd2388240e502c10bbeda43b.jpeg)

When I am trying to burn an image, my laser head seems to skip or become out of line, you can see in the image I attached my first attempt it started burning off the side. Then the second time I tried it seemed to rotate and move further on one end than the other after that I ultimately stopped the burn. I have my omtech 60 connected via Ethernet. I have been able to successfully burn images and I cannot find a pattern to why or when this happens. Has anyone seen this type of behavior when burning images? It happens on grayscale as well as dither.

---

<div class="post-metadata">

**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\
**Post date:** [November 28, 2023, 2:20am UTC](https://forum.lightburnsoftware.com/t/what-is-happening-here/118320/2 "2023-11-28T02:20:33Z")

</div>

Crazy thought but if i had to guess, one side of your X is getting stuck and your X axis is getting off squareness with the machine frame mid engrave

make sure nothing in the linear rails, and both belts are tight and healthy

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/6/4/642e50eaca8a34c3f7a3a3a3b037e7ab2601c7a1.jpeg)

---

<div class="post-metadata">

**Author:** ![BoneM4nwalkin](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/b4bc9f/32.png) [@BoneM4nwalkin](https://forum.lightburnsoftware.com/u/BoneM4nwalkin)\
**Post date:** [November 28, 2023, 3:25am UTC](https://forum.lightburnsoftware.com/t/what-is-happening-here/118320/3 "2023-11-28T03:25:25Z")

</div>

Ok I lubricated the rails with some dry graphite lubricant, and the gantry actually moves much smoother when pushing it by hand, I had it apart the other day to diagnose and I actually found a loose screw dropped into the rail presumably from assembly, so I removed that, but that didn’t seem to solve the problem initially after I put it back together. I will try and run something tonight and see if the lubricant did the trick! Thanks

---

<div class="post-metadata">

**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\
**Post date:** [November 28, 2023, 1:05pm UTC](https://forum.lightburnsoftware.com/t/what-is-happening-here/118320/4 "2023-11-28T13:05:10Z")

</div>

Let us know how it goes!

---

<div class="post-metadata">

**Author:** ![BoneM4nwalkin](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/b4bc9f/32.png) [@BoneM4nwalkin](https://forum.lightburnsoftware.com/u/BoneM4nwalkin)\
**Post date:** [November 28, 2023, 2:30pm UTC](https://forum.lightburnsoftware.com/t/what-is-happening-here/118320/5 "2023-11-28T14:30:50Z")

</div>

I was able to complete a large picture engrave without any problems!

 ![IMG_20231128_062456](https://forum.lightburnsoftware.com/uploads/default/original/3X/0/d/0d50ff8c1dc5b8d6fa157ea491ef33bb036eeda8.jpeg)

I had a little trouble sending the file to my laser, but that I attribute to my wife watching Netflix at the same time on the internet… Need to set up more QOS for the network. But using a USB stick worked perfectly.

---

<div class="post-metadata">

**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\
**Post date:** [November 28, 2023, 2:40pm UTC](https://forum.lightburnsoftware.com/t/what-is-happening-here/118320/6 "2023-11-28T14:40:39Z")

</div>

Netflix… affecting bandwidth since 2000 😃

Glad you fixed it. keep a good eye on it, those things tend to creep back on you
