# Wood & Acrylic Fun

**URL:** <https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335>\
**Category:** Finished Creations\
**Tags:** megathread, technique\
**Created:** [July 26, 2025, 9:39am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335 "2025-07-26T09:39:48Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chuckphd](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/chuckphd/32/93920_2.png) [@Chuckphd](https://forum.lightburnsoftware.com/u/Chuckphd)\
**Post date:** [July 26, 2025, 9:39am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/1 "2025-07-26T09:39:48Z")

</div>

![1000001886](https://forum.lightburnsoftware.com/uploads/default/original/3X/8/0/809bd0bb413526cc2208cb610659cd5be1bf38fe.jpeg)  
 ![1000001893](https://forum.lightburnsoftware.com/uploads/default/original/3X/3/1/31185800925c1ddb7cf51749d8956c2b3626c901.jpeg)  
 ![1000001896](https://forum.lightburnsoftware.com/uploads/default/original/3X/3/4/34f6eb3cde4fb3a6a305a5cda529300c4ffeeb3b.jpeg)

 ![1000001928](https://forum.lightburnsoftware.com/uploads/default/original/3X/2/f/2fc3db5e8d1c444054f945f294c8cb457b38a207.jpeg)  
 ![1000001921](https://forum.lightburnsoftware.com/uploads/default/original/3X/b/3/b3ab332095f1a00fcad74f863112b4f5150a6e36.jpeg)  
 ![1000001929](https://forum.lightburnsoftware.com/uploads/default/original/3X/5/f/5f0295a349277139a0f3cb301645591a17a233f8.jpeg)

 ![IMG_1091](https://forum.lightburnsoftware.com/uploads/default/original/3X/9/a/9a55f89e4c8f49ddda443d677e0111a609902be5.jpeg)  
 ![IMG_1090](https://forum.lightburnsoftware.com/uploads/default/original/3X/5/a/5af5afc3486607a7b48f2b945e80b27a679aff38.jpeg)  
 ![IMG_1092](https://forum.lightburnsoftware.com/uploads/default/original/3X/0/b/0b4e2d258b42cf23000f865667ba8fc03bea6130.jpeg)

 ![IMG_1094](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/f/af4a646554dface90ac6c74a09a9c70559ccef40.jpeg)  
 ![IMG_1095](https://forum.lightburnsoftware.com/uploads/default/original/3X/d/8/d8ea580231d0a159cb4663a04cf0f9f41551a043.jpeg)  
 ![IMG_1096](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/8/e87d4259236aa2ade4ec89158e89633d0b2be659.jpeg)

 ![IMG_1097](https://forum.lightburnsoftware.com/uploads/default/original/3X/b/f/bf4b88c132460204c81613b9e1947415efe1405a.jpeg)  
 ![IMG_1098](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/5/a532c92858663c89e78d275d54ac6d0f2e91a621.jpeg)  
 ![IMG_1099](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/5/a5438c0a59c004d88e27f9462d8e4d2746cabc96.jpeg)

 ![IMG_1100](https://forum.lightburnsoftware.com/uploads/default/original/3X/0/4/044c09afb5d8663682bb9211dce248f2b05999e7.jpeg)  
 ![IMG_1101](https://forum.lightburnsoftware.com/uploads/default/original/3X/5/0/509d0bd9f7d09b83a84aae1f2d62c9b0c4502f5e.jpeg)  
 ![IMG_1102](https://forum.lightburnsoftware.com/uploads/default/original/3X/5/e/5eaa9c6f85e882b3783e8f805cac36ffb638f254.jpeg)

 ![IMG_1103](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/d/ed6f4b251b6748f53764dab9c48e45c58de674be.jpeg)  
 ![IMG_1104](https://forum.lightburnsoftware.com/uploads/default/original/3X/4/f/4f4e2b97b631def14a89ff61966401330efe2540.jpeg)  
 ![IMG_1105](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/b/ebfaaa2c65a8f0a97d422f04ddda5c63bfe83b35.jpeg)

 ![IMG_1106](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/7/a74378aa157581dd51ed7fa2549462f6f0b5ff1d.jpeg)  
 ![IMG_1107](https://forum.lightburnsoftware.com/uploads/default/original/3X/2/1/2195d812f6d317e0b5c01744de8f382eefb85cdd.jpeg)  
 ![IMG_1108](https://forum.lightburnsoftware.com/uploads/default/original/3X/6/d/6d4b03e73848fb3b1fff5c4011a67aba59050414.jpeg)

 ![IMG_1109](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/d/ad08e2ad78eb438960ac5fb24f8f0cacd71aab5a.jpeg)  
 ![IMG_1110](https://forum.lightburnsoftware.com/uploads/default/original/3X/c/2/c2c63efc89affbe96e85b495f6881fc3b22ed89d.jpeg)  
 ![IMG_1111](https://forum.lightburnsoftware.com/uploads/default/original/3X/4/5/450fe7c267392b781c096b80320a4cd1457b0116.jpeg)

---

<div class="post-metadata">

**Author:** ![Pete.IRL](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/ea666f/32.png) [@Pete.IRL](https://forum.lightburnsoftware.com/u/Pete.IRL)\
**Post date:** [July 26, 2025, 9:55am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/2 "2025-07-26T09:55:17Z")

</div>

Super Outstanding work Chuck.

The acoustic guitar is my favourite but they are all great. The cases they’re in really enhance the finish…and very practical.  
Well done for going all the way.

---

<div class="post-metadata">

**Author:** ![vtskiman](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/v/e47c2d/32.png) [@vtskiman](https://forum.lightburnsoftware.com/u/vtskiman)\
**Post date:** [July 26, 2025, 11:55am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/3 "2025-07-26T11:55:45Z")

</div>

Where did you get [or did you create] these laser templates? Also, did you make the acrylic enclosure or buy them? Any and all links would be fantastic - just as all these are!

---

<div class="post-metadata">

**Author:** ![ehendrix](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ehendrix/32/109326_2.png) [@ehendrix](https://forum.lightburnsoftware.com/u/ehendrix)\
**Post date:** [July 26, 2025, 12:35pm UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/4 "2025-07-26T12:35:33Z")

</div>

Very, very cool work. What machine do you use?

---

<div class="post-metadata">

**Author:** ![Chuckphd](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/chuckphd/32/93920_2.png) [@Chuckphd](https://forum.lightburnsoftware.com/u/Chuckphd)\
**Post date:** [July 26, 2025, 7:40pm UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/5 "2025-07-26T19:40:39Z")

</div>

> [@vtskiman](#):
>
> Where did you get [or did you create] these laser templates?

Etsy 🙂 has these\

> [@ehendrix](#):
>
> Very, very cool work. What machine do you use?

Monport 130w turned put to,be a really good machine…  
seeing as I had not ventured into the Laser world, but having 15yrs of 3D design that helped…

> [@jkwilborn](#):
>
> About time you put them in the correct area.. lol

Agree Did not ever see this topic 🙂

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [July 26, 2025, 7:41pm UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/6 "2025-07-26T19:41:19Z")

</div>

About time you put them in the correct area.. lol

They look great as usual.

😺

---

<div class="post-metadata">

**Author:** ![Chuckphd](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/chuckphd/32/93920_2.png) [@Chuckphd](https://forum.lightburnsoftware.com/u/Chuckphd)\
**Post date:** [July 26, 2025, 9:29pm UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/7 "2025-07-26T21:29:26Z")

</div>

> [@vtskiman](#):
>
> Also, did you make the acrylic enclosure or buy them?

Each Enclosure is custom to fit the design…  
I use 5mm acrylic and try to match the depth of the design with 1mm over.

I decided that the acrylic cover would protect the many layers from crevis dust  
that once it gets in would almost be impossible to clean again…  
keeps the design nice and fresh looking…

---

<div class="post-metadata">

**Author:** ![keith2022](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/0ea827/32.png) [@keith2022](https://forum.lightburnsoftware.com/u/keith2022)\
**Post date:** [July 27, 2025, 7:10am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/8 "2025-07-27T07:10:40Z")

</div>

really nice projects , well done 😀

---

<div class="post-metadata">

**Author:** ![sqw](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/b5e925/32.png) [@sqw](https://forum.lightburnsoftware.com/u/sqw)\
**Post date:** [July 28, 2025, 6:30am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/9 "2025-07-28T06:30:00Z")

</div>

How are you bonding the acrylic together - it looks really clean

---

<div class="post-metadata">

**Author:** ![Chuckphd](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/chuckphd/32/93920_2.png) [@Chuckphd](https://forum.lightburnsoftware.com/u/Chuckphd)\
**Post date:** [July 28, 2025, 7:39am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/10 "2025-07-28T07:39:26Z")

</div>

I only use Weld-On products..

**Weld-On 3** is quick drying will start to bond and hold in place in 1-3 minutes  
total cure at least 4 hrs, since it is fast acting it attacks the acrylic and start to melt it faster  
so any splash droplets will need to be wiped up very fast, I use KimWipes they soak up very well and get into  
small places..

**Weld-On 4** is a little slow for more working time, and it does not blemish the surface as much as Weld-On 3 as it takes longer to attack and melt the acrylic surfaces so you have a little more time for oversplash cleanup…

**Weld-On 16** is Gap Filling if you have two pieces with a kerf cut to deal with I tack them together with Weld-On 3, them go back and fill in with Weld-On 16.

Amazon has Weld-On… Temu/Etsy/Ebay all have the Applicators and Tips…

Also I bought some Brown Glass Bottles to put the Weld-On 3/4 in for easy use, it comes in Cans  
so after opening you really cannot seal it good again and in a few weeks it will evaporate, so I use the  
Lab Style Brown bottles with Black Tops… I like these bottles and use them for other chems that need to  
kept from any outside light, that might affect the fluid you are using also…

I bought a bag of plastic bottle applicators and then use the Red tip needle applicator…  
The great thing about Weld-On 3/4 is that it evaporates and does not ‘clog’  
If you were to put a few drops on, say a piece of glass, it will evaporate and have no residue.  
SO…the applicator tips NEVER clog, unless you touch them to any soft melted acrylic as you  
apply it which is mostly never as your technique is to quick squeeze it into the crevis of the to parts anyway…  
Weld-On 16 will clog some…but easily cleaned.

You get good at applying after about 3 or 4 times working with this stuff…  
my biggest issue is going too slow and since the Weld-On3/4 is VERY liquid, it can splash some with the  
metal tip dragging on the two parts are you apply it… BUT this is a like the first dance with your girlfriend,  
you learn how to use your hands properly 🙂 with practice…

hope this helps… 🧐

 ![20250728_031650](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/a/ea3f86392f326df2888de39e98d8952597386f83.jpeg)  
 ![20250728_033236](https://forum.lightburnsoftware.com/uploads/default/original/3X/7/b/7bf426f24b7a2735303e7293269461ae8be99357.jpeg)

---

<div class="post-metadata">

**Author:** ![sqw](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/b5e925/32.png) [@sqw](https://forum.lightburnsoftware.com/u/sqw)\
**Post date:** [July 28, 2025, 8:48am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/11 "2025-07-28T08:48:06Z")

</div>

Really helpful - thank you. I’ve used hobby acrylic glue on coloured acrylic, with OK results, but useless on clear materials. Time to order some and experiment on some scraps I think.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [July 28, 2025, 12:20pm UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/12 "2025-07-28T12:20:29Z")

</div>

> [@Chuckphd](#):
>
> bag of plastic bottle applicators

[Disposable transfer pipettes](https://www.amazon.com/s?k=disposable+transfer+pipettes) and [medicine cups](https://www.amazon.com/s?k=disposable+plastic+medicine+cups) come in handy for gooey adhesives like epoxy.

They’re too generous for low-viscosity solvent glues, though, as I discovered the hard way.

Some things you’re just not ever going to get clean again. 😁

---

<div class="post-metadata">

**Author:** ![Chuckphd](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/chuckphd/32/93920_2.png) [@Chuckphd](https://forum.lightburnsoftware.com/u/Chuckphd)\
**Post date:** [July 29, 2025, 11:24am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/13 "2025-07-29T11:24:23Z")

</div>

Yet Another…

12 x 12 ish 5 layers 3mm

 ![1000002167](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/e/1e0eba4c5e03a40cd26b4a91074cd1db0237b9a4.jpeg)

 ![1000002169](https://forum.lightburnsoftware.com/uploads/default/original/3X/8/d/8dc63d210b2768233ce3477da5e9c445dc9bc4e4.jpeg)

 ![1000002168](https://forum.lightburnsoftware.com/uploads/default/original/3X/d/7/d7795114c386670996647cfe6f1548f66aaca21e.jpeg)

---

<div class="post-metadata">

**Author:** ![Pete.IRL](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/ea666f/32.png) [@Pete.IRL](https://forum.lightburnsoftware.com/u/Pete.IRL)\
**Post date:** [July 29, 2025, 10:00pm UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/14 "2025-07-29T22:00:32Z")

</div>

Meant to say…Really clever use of woods in the base for the lowrider one.

---

<div class="post-metadata">

**Author:** ![Chuckphd](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/chuckphd/32/93920_2.png) [@Chuckphd](https://forum.lightburnsoftware.com/u/Chuckphd)\
**Post date:** [July 30, 2025, 6:39pm UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/15 "2025-07-30T18:39:55Z")

</div>

> [@Pete.IRL](#):
>
> Meant to say…Really clever use of woods in the base for the lowrider one

Hey Pete…

My son has a high end UV printer that I use for the wood grains 🙂  
The detail is really good especially if you keep the real wood grain in the same direction of course..

So that fancy ‘inlay’ is just a really good replication 🙂 but it works just fine and keeps the price  
and the build effort low…

all the colors are the designs are done on the UV printer…

We just ordered another Larger UV printer that does A1 size so I am hoping to do some larger designs soon… 🤪 Itching to do some 17 x 25ish sizes…

---

<div class="post-metadata">

**Author:** ![TravisGood](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/travisgood/32/205_2.png) [@TravisGood](https://forum.lightburnsoftware.com/u/TravisGood)\
**Post date:** [July 30, 2025, 6:57pm UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/16 "2025-07-30T18:57:04Z")

</div>

@Chuckphd, I’d like to learn what uses you put UV printers to. In my community woodshop I’d like to justify a Eufymake UV printer but am struggling with use cases that are more than “vibrant dye sublimation”. Sharing your experiences might help.

---

<div class="post-metadata">

**Author:** ![Pete.IRL](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/ea666f/32.png) [@Pete.IRL](https://forum.lightburnsoftware.com/u/Pete.IRL)\
**Post date:** [July 30, 2025, 10:46pm UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/17 "2025-07-30T22:46:40Z")

</div>

Chuck

Are you telling me that the baseboard is one single piece and that the color and grain are printed on…and the colors on the bike layers are also printed.

Is printing cheaper than painting or just more efficient. I see some manufacturers make ink pens-modules that attach to the gantry of laser machines, Are they comparable to UV printing?

I must find out what are these UV printers.

It still takes talent to produce something simple and pleasing..Less is more! In contrast to the others eg turtle which are vibrant with great color choices and finish.

---

<div class="post-metadata">

**Author:** ![morgin\_black](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/b2d939/32.png) [@morgin\_black](https://forum.lightburnsoftware.com/u/morgin_black)\
**Post date:** [July 31, 2025, 5:24am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/18 "2025-07-31T05:24:48Z")

</div>

holy crap, these are awesome!, what program did you use to make the layers?

---

<div class="post-metadata">

**Author:** ![Chuckphd](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/chuckphd/32/93920_2.png) [@Chuckphd](https://forum.lightburnsoftware.com/u/Chuckphd)\
**Post date:** [July 31, 2025, 6:33am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/19 "2025-07-31T06:33:11Z")

</div>

> [@TravisGood](#):
>
> I’d like to learn what uses you put UV printers to

wow where do I start… we make custom Metal tags for our Guitar Amps, with serial number plates…  
my son also make Proxy MTG (magic the gathering) cards, best thing I can offer is to watch a few youtube  
videos, so many out there…the best thing about the UV printers that we found is the detail and you can also  
use a coat of varnish to make them print last longer…  
Also things like uneven surface…this is a big deal, the most common example is a golf ball, we have not done this, but when doing some wood patterns and the offset due to the wood having some bends could be 2-4 mm  
and the printing works very well for this…  
and as you mentioned, the ‘detail’ is fantastic… and the colors…  
Now it does take some playing with the setting and actually getting to understand your printer/software,  
but once you do it is pretty much load and print…  
Now…the biggie…you HAVE to at least print 1 or 2 pages every day to keep the heads clean…  
Especially with the white ink, it tends to clog for some reason…viscous properties I suspect…  
but most better printers have a ‘clean’ function that parks the head and actually sucks the ink out of the head  
and wipes it clean… You may have to do this a couple time but it work well…  
And be prepared to do maintenance, watch a few of ‘Jays to do list’ UV printer videos..  
he goes thru a bunch of UV issues…  
and the heads will wear out, we have not done this yet but I have tore down the head and all the cabling  
on our Chinese brand printer to get it ‘sealed’ as the inks were getting on the print head connectors and causing issues… again… you will get to know your printer well ! same as with Lasers, or 3D printers…  
they all fall in that ‘fix me’ category… 🙂 hope this helps…

---

<div class="post-metadata">

**Author:** ![Chuckphd](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/chuckphd/32/93920_2.png) [@Chuckphd](https://forum.lightburnsoftware.com/u/Chuckphd)\
**Post date:** [July 31, 2025, 6:38am UTC](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335/20 "2025-07-31T06:38:36Z")

</div>

> [@morgin\_black](#):
>
> holy crap, these are awesome!, what program did you use to make the layers?

You can find design files on many sites, crafing sites etc…search laser layer designs…

> [@Pete.IRL](#):
>
> It still takes talent to produce something simple and pleasing..Less is more!

Pete: I would love to take credit for the great designs, but I only choose the colors and wood sizes…  
I do resize the designs to a nice size but truth is other than the custom acrylic case for dust protection to keep  
them clean…these are from other design artists that, actually have talent 🙂  
I just like making them… More to come…Much More…

[Next page](https://forum.lightburnsoftware.com/t/wood-acrylic-fun/176335.md?page=2)
