# Work through printer ender 3

**URL:** <https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686>\
**Category:** LightBurn Software Questions\
**Created:** [November 21, 2019, 1:02pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686 "2019-11-21T13:02:16Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![yb1154](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/y/48db29/32.png) [@yb1154](https://forum.lightburnsoftware.com/u/yb1154)\
**Post date:** [November 21, 2019, 1:02pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/1 "2019-11-21T13:02:16Z")

</div>

Work through printer ender 3  
Unable to configure printer software

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [November 21, 2019, 2:38pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/2 "2019-11-21T14:38:03Z")

</div>

I am not familiar with the Ender 3 - What firmware does it use? It is probably Marlin, which would mean you have to manually configure it, instead of using the automatic device search. Close the automatic window, then click the ‘Create manually’ button and choose Marlin. Follow the prompts from there.

---

<div class="post-metadata">

**Author:** ![yb154](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/y/a9a28c/32.png) [@yb154](https://forum.lightburnsoftware.com/u/yb154)\
**Post date:** [November 21, 2019, 2:58pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/3 "2019-11-21T14:58:35Z")

</div>

The laser does not light up during printing

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [November 21, 2019, 3:40pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/4 "2019-11-21T15:40:44Z")

</div>

What is it connected to? With Marlin there are multiple ways to control the laser - it’s usually done through the fan output, using M106 / M107 to control it, but it can also be done with M3/M5, and you might be connected to fan 1 or 2 instead of fan 0. Look in Edit \> Device Settings to change these things.

---

<div class="post-metadata">

**Author:** ![yb154](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/y/a9a28c/32.png) [@yb154](https://forum.lightburnsoftware.com/u/yb154)\
**Post date:** [November 24, 2019, 8:28am UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/5 "2019-11-24T08:28:33Z")

</div>

I can send pictures because I don’t understand it  
It used to work for me before I bought the software

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [November 24, 2019, 2:24pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/6 "2019-11-24T14:24:50Z")

</div>

Did you change anything else? There is no difference between the purchased version of LightBurn and the trial version. Paying for a license doesn’t change your settings.

---

<div class="post-metadata">

**Author:** ![yb154](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/y/a9a28c/32.png) [@yb154](https://forum.lightburnsoftware.com/u/yb154)\
**Post date:** [November 24, 2019, 3:23pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/7 "2019-11-24T15:23:56Z")

</div>

Why doesn’t the laser light up at startup

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [November 24, 2019, 4:48pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/8 "2019-11-24T16:48:40Z")

</div>

I have no idea. You have not shared any information other than “laser does not light up”.

Do you have any other software that fires the laser? Can you look at the GCode generated by something else to see what fires it? Marlin can be configured in many, many ways, so it’s important to know how you have the laser connected (to which output) and how your version of Marlin is configured (does it need M03/M05, or M106/M107, for example).

---

<div class="post-metadata">

**Author:** ![yb154](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/y/a9a28c/32.png) [@yb154](https://forum.lightburnsoftware.com/u/yb154)\
**Post date:** [November 25, 2019, 9:17am UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/9 "2019-11-25T09:17:39Z")

</div>

I don’t understand much about this what is m107 and more

---

<div class="post-metadata">

**Author:** ![yb154](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/y/a9a28c/32.png) [@yb154](https://forum.lightburnsoftware.com/u/yb154)\
**Post date:** [November 25, 2019, 9:18am UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/10 "2019-11-25T09:18:58Z")

</div>

While the software is running, the laser is on but not burning at the time of the burn

---

<div class="post-metadata">

**Author:** ![yb154](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/y/a9a28c/32.png) [@yb154](https://forum.lightburnsoftware.com/u/yb154)\
**Post date:** [November 25, 2019, 9:28am UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/11 "2019-11-25T09:28:06Z")

</div>

Laser has 4 wires yellow and white and red and black connection for Ender 3 printer has two wires input

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [November 25, 2019, 4:24pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/12 "2019-11-25T16:24:53Z")

</div>

I’m sorry, but I do not know much about Marlin. You haven’t said anything like which firmware it uses, or what version, how you have it configured, or anything else other than “it doesn’t work”. That’s very little to go on. I do not know the Ender 3 hardware, or the laser module you have, so you will need to talk to someone familiar with the hardware you have to figure out how to connect it properly.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [December 25, 2019, 4:24pm UTC](https://forum.lightburnsoftware.com/t/work-through-printer-ender-3/8686/13 "2019-12-25T16:24:57Z")

</div>

Closed on December 25, 2019, 4:24pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
