I have an Xtool extended version and was just looking at my GRBL settings and they don’t match the format that my cnc router does as far as the definition of each value. Can someone tell me if they are proprietary protected by Xtool and unchangeable? Here is what I get when I type $$:
$$
ok
$0=1
$1=0.03
$2=0
$3=0
$4=0
$5=0
$6=0
$10=255
$11=0.0
$12=0.0
$13=0
$20=0
$21=1
$22=1
$23=0
$24=25.0
$25=3000.0
$26=250
$27=1.0
$30=1000
$31=0.1
$32=1
$100=100
$101=100
$102=0
$110=18000
$111=6000
$112=6000
$120=2500.000000
$121=300.000000
$122=300
$130=432.000
$131=406
$132=0
ok,
I would like to do some modifications as far as orientation of x and y swapping but my Lightburn settings don’t show where I thought I would see them. Please help!