# Y axis inversion concern **URL:** \ **Category:** Sculpfun\ **Created:** [November 20, 2022, 1:09am UTC](https://forum.lightburnsoftware.com/t/y-axis-inversion-concern/82268 "2022-11-20T01:09:56Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Pelican79](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/a9adbd/32.png) [@Pelican79](https://forum.lightburnsoftware.com/u/Pelican79)\ **Post date:** [November 20, 2022, 1:09am UTC](https://forum.lightburnsoftware.com/t/y-axis-inversion-concern/82268/1 "2022-11-20T01:09:56Z")
Hello, I allow myself to post a bottle in the sea, I can’t find any info about this subject. When I use the function move no problem on the X axis but the Y axis is reversed: I click on the left it goes on the right and vice versa. I couldn’t find any function to invert the axis. Do you have an idea. thanks in advance ---
**Author:** ![berainlb](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/85f322/32.png) [@berainlb](https://forum.lightburnsoftware.com/u/berainlb)\ **Post date:** [November 20, 2022, 4:06am UTC](https://forum.lightburnsoftware.com/t/y-axis-inversion-concern/82268/2 "2022-11-20T04:06:06Z")
Go to Device Settings. Change origin to bottom-left dot. Retest. ---
**Author:** ![misken](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/misken/32/47593_2.png) [@misken](https://forum.lightburnsoftware.com/u/misken)\ **Post date:** [November 20, 2022, 9:09pm UTC](https://forum.lightburnsoftware.com/t/y-axis-inversion-concern/82268/3 "2022-11-20T21:09:02Z")
You can also try to use LaserGRBL. If the movement is correct there, it’s LightBurn setting’s problem (as PY pointed out how to solve). Otherwise, (less likely) it’s a firmware setting which you can easily revert. You can invert any single axis as you like. But better check before what is the exact reason.