# Z Axis configuration help on Mopa Fiber

**URL:** <https://forum.lightburnsoftware.com/t/z-axis-configuration-help-on-mopa-fiber/191403>\
**Category:** LightBurn Software Questions\
**Created:** [July 23, 2026, 5:28am UTC](https://forum.lightburnsoftware.com/t/z-axis-configuration-help-on-mopa-fiber/191403 "2026-07-23T05:28:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![iantull](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/i/ee59a6/32.png) [@iantull](https://forum.lightburnsoftware.com/u/iantull)\
**Post date:** [July 23, 2026, 5:28am UTC](https://forum.lightburnsoftware.com/t/z-axis-configuration-help-on-mopa-fiber/191403/1 "2026-07-23T05:28:34Z")

</div>

I’m having some issues in getting my Z Axis to work in Lightburn. I’ve loaded the “Pre-Release” that allows me to select Z Axis, but it does not recognise the Z Axis Motor, for some reason.

The Fiber Laser is Mopa and has the autofocus function on it. The Autofocus works fine, I can add the job at different levels from the table and press the autofocus and it finds the correct height, so that is OK. What I want to do is be able to set-up templates that will require the focus to be out of focus and was hoping that I would be able to get this done within the software.

If anyone can suggest where I need to look, I would be appreciative.

Thanks, Ian

---

<div class="post-metadata">

**Author:** ![joed](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/joed/32/65276_2.png) [@joed](https://forum.lightburnsoftware.com/u/joed)\
**Post date:** [July 23, 2026, 5:33pm UTC](https://forum.lightburnsoftware.com/t/z-axis-configuration-help-on-mopa-fiber/191403/2 "2026-07-23T17:33:45Z")

</div>

What kind of Galvo laser are you using?

EzCad2 based lasers would only have z-axis control in the v2.1 release candidates (which is what I’m assuming you’re referencing), but only BSL and EzCad3 lasers have full z-axis support since the official release of v2.1.00 to now (v2.1.03)

If your autofocus is working fine, how is the autofocus enabled/used? If it’s an independent system from the rest of the laser, that may be why LightBurn can’t see the z-axis motor.

---

<div class="post-metadata">

**Author:** ![Ico](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ico/32/121499_2.png) [@Ico](https://forum.lightburnsoftware.com/u/Ico)\
**Post date:** [July 23, 2026, 9:24pm UTC](https://forum.lightburnsoftware.com/t/z-axis-configuration-help-on-mopa-fiber/191403/3 "2026-07-23T21:24:27Z")

</div>

Korrekt.

Mein EzCad3-Laser unterstützt die Z-Achse. Die Justierung kann unter den Einstellungen recht komfortabel vorgenommen werden.

Ich würde mir aber trotzallem einen up- und down-Button im Arbeitsbereich wünschen.

---

<div class="post-metadata">

**Author:** ![iantull](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/i/ee59a6/32.png) [@iantull](https://forum.lightburnsoftware.com/u/iantull)\
**Post date:** [July 27, 2026, 8:43pm UTC](https://forum.lightburnsoftware.com/t/z-axis-configuration-help-on-mopa-fiber/191403/4 "2026-07-27T20:43:19Z")

</div>

Thanks for the reply, yes is an EzCad2 based laser and yes it is an independent autofocus so I’m assuming that LightBurn can’t see it. I’ll have a further look inside the unit and see how it is connected.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [August 26, 2026, 8:43pm UTC](https://forum.lightburnsoftware.com/t/z-axis-configuration-help-on-mopa-fiber/191403/5 "2026-08-26T20:43:25Z")

</div>

Closed on August 26, 2026, 8:43pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
