# \#ethernet **URL:** https://forum.lightburnsoftware.com/tag/ethernet/22.md [Latest](https://forum.lightburnsoftware.com/latest.md) · [Categories](https://forum.lightburnsoftware.com/categories.md) · [Tags](https://forum.lightburnsoftware.com/tags.md) --- ## [Boss Laser HP3655 over Ethernet](https://forum.lightburnsoftware.com/t/boss-laser-hp3655-over-ethernet/160863)
**Author:** [@tcraig](https://forum.lightburnsoftware.com/u/tcraig)\ **Replies:** 5\ **Last updated:** [January 2, 2025, 7:31pm UTC](https://forum.lightburnsoftware.com/t/boss-laser-hp3655-over-ethernet/160863 "2025-01-02T19:31:19Z")
I have done the CMD \>ipconfig and entered in my ip address off by 100 on the last three digits. I can not get the laser to connect via ethernet. The cable is ran from the computer to the laser. Any have suggestions? --- ## [Wireless Ethernet Solution (I've seen CISA.gov flagged extenders)](https://forum.lightburnsoftware.com/t/wireless-ethernet-solution-ive-seen-cisa-gov-flagged-extenders/149688)
**Author:** [@dapeake](https://forum.lightburnsoftware.com/u/dapeake)\ **Replies:** 6\ **Last updated:** [September 12, 2024, 9:20pm UTC](https://forum.lightburnsoftware.com/t/wireless-ethernet-solution-ive-seen-cisa-gov-flagged-extenders/149688 "2024-09-12T21:20:02Z")
I am trying to improve the workflow of my office shop by eliminating reliance on USB to transport files to my Ruida controller. Another forum member enjoyed success with a device that can be found for under $2 on ebay, … --- ## [Files fail to send](https://forum.lightburnsoftware.com/t/files-fail-to-send/146803)
**Author:** [@JDP](https://forum.lightburnsoftware.com/u/JDP)\ **Replies:** 7\ **Last updated:** [August 11, 2024, 9:28am UTC](https://forum.lightburnsoftware.com/t/files-fail-to-send/146803 "2024-08-11T09:28:26Z")
Hi Again, Trying to send a file to test the updated version of Lightburn and keep getting the message " File Transfer Failed ", click OK and second message is " There was a problem sending data to the laser. Just purcha… --- ## [Struggling to connect to Ruida with ethernet](https://forum.lightburnsoftware.com/t/struggling-to-connect-to-ruida-with-ethernet/132118)
**Author:** [@NellCo](https://forum.lightburnsoftware.com/u/NellCo)\ **Replies:** 6\ **Last updated:** [March 7, 2024, 6:07pm UTC](https://forum.lightburnsoftware.com/t/struggling-to-connect-to-ruida-with-ethernet/132118 "2024-03-07T18:07:17Z")
Hi all, I’m trying to change from Topwisdom to Ruida, RDC6445S(EC) I’ve added a ruida manual connection to devices, showing laser disconnected. Here’s my IP config, ruida IP settings, and showing i’m still unable to p… --- ## [Network (Ethernet and Wifi) for TopWisdom TL-A3](https://forum.lightburnsoftware.com/t/network-ethernet-and-wifi-for-topwisdom-tl-a3/124615)
**Author:** [@lucassaldanha](https://forum.lightburnsoftware.com/u/lucassaldanha)\ **Replies:** 3\ **Last updated:** [January 13, 2024, 3:36am UTC](https://forum.lightburnsoftware.com/t/network-ethernet-and-wifi-for-topwisdom-tl-a3/124615 "2024-01-13T03:36:52Z")
Hi, I have a Laser Router with the TopWisdom TL-A3 controller and I’m on a Trial period looking to buy the license. This controller has Ethernet and Wifi Network capabilities. I’ve searched this forum and saw that as e… --- ## [Tutorial: Connecting IP Camera to LightBurn on Mac](https://forum.lightburnsoftware.com/t/tutorial-connecting-ip-camera-to-lightburn-on-mac/62179)
**Author:** [@Mdfergus](https://forum.lightburnsoftware.com/u/Mdfergus)\ **Replies:** 4\ **Last updated:** [December 6, 2023, 9:18pm UTC](https://forum.lightburnsoftware.com/t/tutorial-connecting-ip-camera-to-lightburn-on-mac/62179 "2023-12-06T21:18:57Z")
This took me a while and there wasn’t too much information out there so I figured I’d put together a guide on my steps to wirelessly access my IP camera in LightBurn. My goal is to keep this general and geared towards M… --- ## [Solved: Old wifi router as bridge for OMTech Polar 350 to connect via home wifi network](https://forum.lightburnsoftware.com/t/solved-old-wifi-router-as-bridge-for-omtech-polar-350-to-connect-via-home-wifi-network/105635)
**Author:** [@tighef](https://forum.lightburnsoftware.com/u/tighef)\ **Replies:** 2\ **Last updated:** [July 24, 2023, 1:18am UTC](https://forum.lightburnsoftware.com/t/solved-old-wifi-router-as-bridge-for-omtech-polar-350-to-connect-via-home-wifi-network/105635 "2023-07-24T01:18:49Z")
Hello, I wanted to share how I got my OMTech Polar 350 connected to my home wifi network using an old wifi router as a bridge. Several posts include helpful information that got me part of the way there, but I didn’t see… --- ## [Cannot get LB to recognize OMTech 60 on Mac](https://forum.lightburnsoftware.com/t/cannot-get-lb-to-recognize-omtech-60-on-mac/101884)
**Author:** [@Waterwizard](https://forum.lightburnsoftware.com/u/Waterwizard)\ **Replies:** 11\ **Last updated:** [June 12, 2023, 12:04pm UTC](https://forum.lightburnsoftware.com/t/cannot-get-lb-to-recognize-omtech-60-on-mac/101884 "2023-06-12T12:04:31Z")
Please be gentle; retired 13 years, technology stale and complete laser newbie. Downloaded LB, bought key with OMTech. LB comes up quick (cannot find on Finder Application files but program starts, looks for a laser, a… --- ## [Connect Omtech Polar to Ethernet](https://forum.lightburnsoftware.com/t/connect-omtech-polar-to-ethernet/94856)
**Author:** [@sarahsteffen](https://forum.lightburnsoftware.com/u/sarahsteffen)\ **Replies:** 15\ **Last updated:** [April 19, 2023, 1:33pm UTC](https://forum.lightburnsoftware.com/t/connect-omtech-polar-to-ethernet/94856 "2023-04-19T13:33:04Z")
I have an Omtech Polar laser, and have successfully connected it to my Mac via the USB port. I would like to connect it via the ethernet port - here is where the issue lies. The Polar’s don’t have an external controller,… --- ## [How do I connect a Ruida Controller with Ethernet? (cont)](https://forum.lightburnsoftware.com/t/how-do-i-connect-a-ruida-controller-with-ethernet-cont/90889)
**Author:** [@evanevery](https://forum.lightburnsoftware.com/u/evanevery)\ **Replies:** 7\ **Last updated:** [February 22, 2023, 3:21pm UTC](https://forum.lightburnsoftware.com/t/how-do-i-connect-a-ruida-controller-with-ethernet-cont/90889 "2023-02-22T15:21:53Z")
Continuing the info from the FAQ How do I connect a Ruida controller with Ethernet?: The reason the above posts suggests “pick a different set of ‘hundreds’ from where your PC is” is because the Ruida TCP/IP Stack is br… --- ## [Linuxcnc - is it supported?](https://forum.lightburnsoftware.com/t/linuxcnc-is-it-supported/79876)
**Author:** [@kazafog](https://forum.lightburnsoftware.com/u/kazafog)\ **Replies:** 6\ **Last updated:** [October 26, 2022, 12:02am UTC](https://forum.lightburnsoftware.com/t/linuxcnc-is-it-supported/79876 "2022-10-26T00:02:38Z")
Hi All, I have recently converted my machine to Linuxcnc. So I thought i’d check if lightburn supported it. So once I had it installed I was then able to choose linuxcnc as a machine but the only comms options were seri… --- ## [Issue in my network](https://forum.lightburnsoftware.com/t/issue-in-my-network/74317)
**Author:** [@neil](https://forum.lightburnsoftware.com/u/neil)\ **Replies:** 4\ **Last updated:** [August 19, 2022, 7:51pm UTC](https://forum.lightburnsoftware.com/t/issue-in-my-network/74317 "2022-08-19T19:51:45Z")
So we are doing some upgrades and stuff at my work and how things are set up now, my computer and laser are on two separate subnets. My laser controller is a Ruida. So for example, my computer ip is 10.1.1.69 and the l… --- ## [RUIDA comms failed over USB, Ethernet, and Bridge](https://forum.lightburnsoftware.com/t/ruida-comms-failed-over-usb-ethernet-and-bridge/66594)
**Author:** [@brycebot](https://forum.lightburnsoftware.com/u/brycebot)\ **Replies:** 13\ **Last updated:** [May 11, 2022, 10:34pm UTC](https://forum.lightburnsoftware.com/t/ruida-comms-failed-over-usb-ethernet-and-bridge/66594 "2022-05-11T22:34:18Z")
My controller has been unable to connect with any devices, and I’ve tried the following options: USB: No comm port showing up. Getting the following error under Device Manager. Unknown USB Device (Device Descriptor Re… --- ## [Torcen 708s Ethernet connection through WIFI or LAN and Lightburn setup](https://forum.lightburnsoftware.com/t/torcen-708s-ethernet-connection-through-wifi-or-lan-and-lightburn-setup/63508)
**Author:** [@Khennig](https://forum.lightburnsoftware.com/u/Khennig)\ **Replies:** 10\ **Last updated:** [March 27, 2022, 9:45pm UTC](https://forum.lightburnsoftware.com/t/torcen-708s-ethernet-connection-through-wifi-or-lan-and-lightburn-setup/63508 "2022-03-27T21:45:17Z")
I have a successful connection using a USB but I am limited by length and don’t feel like constantly moving my laptop all the time. I am trying to set up a connection using ethernet but seem to be unsuccessful. I have a … --- ## [Unable to connect to laser Ethernet](https://forum.lightburnsoftware.com/t/unable-to-connect-to-laser-ethernet/52969)
**Author:** [@rogwabbit](https://forum.lightburnsoftware.com/u/rogwabbit)\ **Replies:** 9\ **Last updated:** [November 30, 2021, 5:20pm UTC](https://forum.lightburnsoftware.com/t/unable-to-connect-to-laser-ethernet/52969 "2021-11-30T17:20:24Z")
I have had issues with lightburn connection to my laser since the upgrade and I can not figure it out at all. It CAN READ the machine settings without issue, every time. What it won’t do is upload a file. Always goes to … --- ## [Ethernet cable between pc and machine](https://forum.lightburnsoftware.com/t/ethernet-cable-between-pc-and-machine/51090)
**Author:** [@kippu](https://forum.lightburnsoftware.com/u/kippu)\ **Replies:** 3\ **Last updated:** [November 3, 2021, 4:12pm UTC](https://forum.lightburnsoftware.com/t/ethernet-cable-between-pc-and-machine/51090 "2021-11-03T16:12:38Z")
Hi peope , I have been connecting my ruida based laser with the pc using the Usb cable but would like to move towards ethernet cable . But I am confused , so this query If I dont intend to get a crossover cable , can I … --- ## [How do I connect a Ruida controller with Ethernet?](https://forum.lightburnsoftware.com/t/how-do-i-connect-a-ruida-controller-with-ethernet/7672)
**Author:** [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\ **Replies:** 0\ **Last updated:** [October 20, 2019, 6:43pm UTC](https://forum.lightburnsoftware.com/t/how-do-i-connect-a-ruida-controller-with-ethernet/7672 "2019-10-20T18:43:05Z")
Setting up a Ruida controller to connect via Ethernet isn’t hard, but it’s not quite as simple as just plugging it in. Follow these steps: 1) Get the IP Address of your computer: For Windows: Open a command prompt (c… --- ## [Lightburn camera on ethernet connected pc](https://forum.lightburnsoftware.com/t/lightburn-camera-on-ethernet-connected-pc/36170)
**Author:** [@Trainwreck](https://forum.lightburnsoftware.com/u/Trainwreck)\ **Replies:** 1\ **Last updated:** [March 17, 2021, 8:34pm UTC](https://forum.lightburnsoftware.com/t/lightburn-camera-on-ethernet-connected-pc/36170 "2021-03-17T20:34:38Z")
Hello, I would really like to get a Lightburn camera set up, but the PC I use for Lightburn is connected to my Ruida controller over ethernet in a different room. Is there any way to set up a camera with this configurati… --- ## [One computer will not communicate with Ruida](https://forum.lightburnsoftware.com/t/one-computer-will-not-communicate-with-ruida/20349)
**Author:** [@Bahnana](https://forum.lightburnsoftware.com/u/Bahnana)\ **Replies:** 2\ **Last updated:** [August 13, 2020, 5:23pm UTC](https://forum.lightburnsoftware.com/t/one-computer-will-not-communicate-with-ruida/20349 "2020-08-13T17:23:59Z")
Hi… Have Lightburn 0.9.11 installed on two computers, both running Win10 with latest updates. A desktop computer and a Microsoft Surface Pro 7. The desktop has wired network, and has no issues with lightburn and my Ru… --- ## [Connect to Cohesion3D mini over ethernet](https://forum.lightburnsoftware.com/t/connect-to-cohesion3d-mini-over-ethernet/1544)
**Author:** [@ben](https://forum.lightburnsoftware.com/u/ben)\ **Replies:** 19\ **Last updated:** [February 26, 2019, 4:36am UTC](https://forum.lightburnsoftware.com/t/connect-to-cohesion3d-mini-over-ethernet/1544 "2019-02-26T04:36:38Z")
Having trouble getting connected to my Cohesion3D mini running smoothieware. I can browse to the smoothie web interface and control the machine so I know the ethernet adapter is working. But Lightburn is just sitting at…