# \#mopa

**URL:** https://forum.lightburnsoftware.com/tag/mopa/120.md

[Latest](https://forum.lightburnsoftware.com/latest.md) · [Categories](https://forum.lightburnsoftware.com/categories.md) · [Tags](https://forum.lightburnsoftware.com/tags.md)

---

## [Help Needed: Deep Black Stainless Steel Annealing on Monport GA 100 MOPA – Smooth Finish, No Surface Texture](https://forum.lightburnsoftware.com/t/help-needed-deep-black-stainless-steel-annealing-on-monport-ga-100-mopa-smooth-finish-no-surface-texture/193898)

<div class="topic-metadata">

**Author:** [@katzendrama](https://forum.lightburnsoftware.com/u/katzendrama)\
**Replies:** 2\
**Last updated:** [November 12, 2026, 4:57pm UTC](https://forum.lightburnsoftware.com/t/help-needed-deep-black-stainless-steel-annealing-on-monport-ga-100-mopa-smooth-finish-no-surface-texture/193898 "2026-11-12T16:57:40Z")

</div>

Hi everyone, I’m using a Monport GA 100 MOPA fiber laser and I’m struggling to achieve good black annealing results on stainless steel. I’ve already searched the forum and found several similar threads, but unfortunate…

---

## [The "Golden Rule" of MOPA settings](https://forum.lightburnsoftware.com/t/the-golden-rule-of-mopa-settings/171740)

<div class="topic-metadata">

**Author:** [@Dannym](https://forum.lightburnsoftware.com/u/Dannym)\
**Replies:** 2\
**Last updated:** [August 11, 2026, 4:32pm UTC](https://forum.lightburnsoftware.com/t/the-golden-rule-of-mopa-settings/171740 "2026-08-11T16:32:07Z")

</div>

TI worked on a “magic formula”. I found the biggest secret of making the MOPA work on MOST things is spacing your LI and pulse SPACING the same at about 0.7 of the spot size. Further apart and they have gaps. Closer a…

---

## [Free tool for MOPA colour layer setup (LightBurn export)](https://forum.lightburnsoftware.com/t/free-tool-for-mopa-colour-layer-setup-lightburn-export/190771)

<div class="topic-metadata">

**Author:** [@jmills](https://forum.lightburnsoftware.com/u/jmills)\
**Replies:** 1\
**Last updated:** [June 22, 2026, 10:19pm UTC](https://forum.lightburnsoftware.com/t/free-tool-for-mopa-colour-layer-setup-lightburn-export/190771 "2026-06-22T22:19:14Z")

</div>

Hi all — first post here, long-time LightBurn user with a MOPA OMTech 30W. I built a free web tool for handling the layer setup side of MOPA colour marking jobs — upload an image, it detects colours and organises them i…

---

## [Anybody use a mopa "workbench expander"?](https://forum.lightburnsoftware.com/t/anybody-use-a-mopa-workbench-expander/189957)

<div class="topic-metadata">

**Author:** [@Dannym](https://forum.lightburnsoftware.com/u/Dannym)\
**Replies:** 8\
**Last updated:** [May 23, 2026, 12:58am UTC](https://forum.lightburnsoftware.com/t/anybody-use-a-mopa-workbench-expander/189957 "2026-05-23T00:58:47Z")

</div>

Someone here is really excited about getting this for the makerspace, but I don’t know what it’s going to do for us. It’s 1m with 700m of travel expanding the enclosure and footprint quite a bit. Does Lightburn even su…

---

## [Color raster images on metal](https://forum.lightburnsoftware.com/t/color-raster-images-on-metal/188901)

<div class="topic-metadata">

**Author:** [@nothing](https://forum.lightburnsoftware.com/u/nothing)\
**Replies:** 6\
**Last updated:** [April 10, 2026, 10:14am UTC](https://forum.lightburnsoftware.com/t/color-raster-images-on-metal/188901 "2026-04-10T10:14:25Z")

</div>

Hello! I’ve been working on printing color photos/raster images on titanium and steel using a 60w MOPA fiber laser with a F290 lens. First, some sample works on titanium (TC4/GR5 alloy) 10cm x 10cm plates. Illustrations: …

---

## [Material Library for Monport Ga100w Mopa Fibre laser](https://forum.lightburnsoftware.com/t/material-library-for-monport-ga100w-mopa-fibre-laser/188546)

<div class="topic-metadata">

**Author:** [@russell1967](https://forum.lightburnsoftware.com/u/russell1967)\
**Replies:** 0\
**Last updated:** [March 20, 2026, 1:51pm UTC](https://forum.lightburnsoftware.com/t/material-library-for-monport-ga100w-mopa-fibre-laser/188546 "2026-03-20T13:51:15Z")

</div>

Hi every one I have got a 100w Mopa Monport fibre laser with Gztech source Anyone got any setting libraries or anything useful i can test and experiment with please

---

## [PCB etching on a MOPA after Drilling/Milling with MillMage](https://forum.lightburnsoftware.com/t/pcb-etching-on-a-mopa-after-drilling-milling-with-millmage/186589)

<div class="topic-metadata">

**Author:** [@Maker.Josh](https://forum.lightburnsoftware.com/u/Maker.Josh)\
**Replies:** 7\
**Last updated:** [January 13, 2026, 2:55am UTC](https://forum.lightburnsoftware.com/t/pcb-etching-on-a-mopa-after-drilling-milling-with-millmage/186589 "2026-01-13T02:55:07Z")

</div>

I have had success with PCB etching but it has taken using a MOPA Galvo Fiber laser to really be able to etch and ablate the copper in a way that is consistent. This process uses both MillMage and LightBurn to do the fu…

---

## [Pretty colors on titanium](https://forum.lightburnsoftware.com/t/pretty-colors-on-titanium/184950)

<div class="topic-metadata">

**Author:** [@nothing](https://forum.lightburnsoftware.com/u/nothing)\
**Replies:** 9\
**Last updated:** [January 4, 2026, 4:10pm UTC](https://forum.lightburnsoftware.com/t/pretty-colors-on-titanium/184950 "2026-01-04T16:10:27Z")

</div>

Hello, beautiful people of Lightburn community, I’ve been practicing doing work with larger (10x10cm) color engravings on titanium (GR5/Ti-6Al-4V alloy) using a 60W MOPA. After so many ruined samples and so much testing …

---

## [JCZFiber driver structure](https://forum.lightburnsoftware.com/t/jczfiber-driver-structure/185680)

<div class="topic-metadata">

**Author:** [@fins](https://forum.lightburnsoftware.com/u/fins)\
**Replies:** 1\
**Last updated:** [December 6, 2025, 3:01pm UTC](https://forum.lightburnsoftware.com/t/jczfiber-driver-structure/185680 "2025-12-06T15:01:07Z")

</div>

I’m trying to understand the depp details of how the JCZ boards work wrt galvo based engravers. My current understanding is as such: Lightburn talks to the JCZ driver board via usb, implementing BJJCZ’s proprietary prot…

---

## [Flat MOPA annealing vs Rotary MOPA annealing](https://forum.lightburnsoftware.com/t/flat-mopa-annealing-vs-rotary-mopa-annealing/184381)

<div class="topic-metadata">

**Author:** [@MrSnid](https://forum.lightburnsoftware.com/u/MrSnid)\
**Replies:** 2\
**Last updated:** [October 30, 2025, 11:57am UTC](https://forum.lightburnsoftware.com/t/flat-mopa-annealing-vs-rotary-mopa-annealing/184381 "2025-10-30T11:57:30Z")

</div>

I’m trying to get colors on a stainless steel tumbler. The only way I can get colors to show up is when I have the rotary disabled. What do I need to change in the rotary settings ?

---

## [Sharing some color material tests for steel](https://forum.lightburnsoftware.com/t/sharing-some-color-material-tests-for-steel/171931)

<div class="topic-metadata">

**Author:** [@nothing](https://forum.lightburnsoftware.com/u/nothing)\
**Replies:** 24\
**Last updated:** [October 15, 2025, 10:38am UTC](https://forum.lightburnsoftware.com/t/sharing-some-color-material-tests-for-steel/171931 "2025-10-15T10:38:33Z")

</div>

Material test gallery Hi, here is a gallery of some material test plates I’ve done trying to find good colors for 304 grade stainless steel. Obviously the colors do not look the same from every angle, so I’ve tried to t…

---

## [Crashing with Monport 30W Mopa](https://forum.lightburnsoftware.com/t/crashing-with-monport-30w-mopa/176124)

<div class="topic-metadata">

**Author:** [@pixel01](https://forum.lightburnsoftware.com/u/pixel01)\
**Replies:** 14\
**Last updated:** [September 2, 2025, 7:37am UTC](https://forum.lightburnsoftware.com/t/crashing-with-monport-30w-mopa/176124 "2025-09-02T07:37:00Z")

</div>

I am having issues with my 30W Mopa from Monport. Whenever I am framing or sending a job for engraving lightburn will crash. I assume defective hardware of setup error. Appreciate your ideas.

---

## [Micromachining with a MOPA](https://forum.lightburnsoftware.com/t/micromachining-with-a-mopa/173556)

<div class="topic-metadata">

**Author:** [@Dannym](https://forum.lightburnsoftware.com/u/Dannym)\
**Replies:** 5\
**Last updated:** [June 24, 2025, 6:09pm UTC](https://forum.lightburnsoftware.com/t/micromachining-with-a-mopa/173556 "2025-06-24T18:09:31Z")

</div>

My company makes some really fine-pitch ceramic ICs- 0.4mm pitch. That’s a 0.2mm lead and 0.2mm gap. Being so thin, they get bent up pretty easily, and then the tooling capable of going between them to fix it is very l…

---

## [Is there no overscan being done with galvos?](https://forum.lightburnsoftware.com/t/is-there-no-overscan-being-done-with-galvos/172887)

<div class="topic-metadata">

**Author:** [@Dannym](https://forum.lightburnsoftware.com/u/Dannym)\
**Replies:** 22\
**Last updated:** [June 9, 2025, 8:53pm UTC](https://forum.lightburnsoftware.com/t/is-there-no-overscan-being-done-with-galvos/172887 "2025-06-09T20:53:43Z")

</div>

I noticed that the cut is basically flat bottom, except if I look close the edge is notably deeper. I’m running at 5000mm/s with 45 deg rotations and the timing is set very accurately. BJJCZ This is making me conclude…

---

## [OMTech MOPA 60W Autofocus Fiber Laser Not Communicating With Lightburn](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214)

<div class="topic-metadata">

**Author:** [@grayghost](https://forum.lightburnsoftware.com/u/grayghost)\
**Replies:** 7\
**Last updated:** [May 7, 2025, 11:44pm UTC](https://forum.lightburnsoftware.com/t/omtech-mopa-60w-autofocus-fiber-laser-not-communicating-with-lightburn/171214 "2025-05-07T23:44:34Z")

</div>

I am at my wits end, I can’t get Lightburn to communicate with my OMTech MOPA 60W Autofocus Fiber Laser. I’ve looked all over these forums and haven’t seen anything just like my issue. The main issue I’ve seen is makin…

---

## [Engraved unpainted travel mug](https://forum.lightburnsoftware.com/t/engraved-unpainted-travel-mug/156706)

<div class="topic-metadata">

**Author:** [@ClayJar](https://forum.lightburnsoftware.com/u/ClayJar)\
**Replies:** 19\
**Last updated:** [January 11, 2025, 12:22am UTC](https://forum.lightburnsoftware.com/t/engraved-unpainted-travel-mug/156706 "2025-01-11T00:22:03Z")

</div>

I have a decent collection of Contigo travel mugs for my wife’s coffee requirements. Half are natural brushed stainless, and the other half… well, they used to have various colors. The colorful coatings are mostly gone …

---

## [Randomise material test order](https://forum.lightburnsoftware.com/t/randomise-material-test-order/153564)

<div class="topic-metadata">

**Author:** [@fins](https://forum.lightburnsoftware.com/u/fins)\
**Replies:** 3\
**Last updated:** [November 1, 2024, 7:43pm UTC](https://forum.lightburnsoftware.com/t/randomise-material-test-order/153564 "2024-11-01T19:43:32Z")

</div>

Is there any way to randomise the order of the shapes burned in the material test? The localised heat effects of ramping power/frequency/speed in the x axis tend to give unreproducible results when these are taken into c…

---

## [MOPA Q-pulse setting only works with the material test](https://forum.lightburnsoftware.com/t/mopa-q-pulse-setting-only-works-with-the-material-test/142855)

<div class="topic-metadata">

**Author:** [@gummi2000](https://forum.lightburnsoftware.com/u/gummi2000)\
**Replies:** 60\
**Last updated:** [August 23, 2024, 3:00pm UTC](https://forum.lightburnsoftware.com/t/mopa-q-pulse-setting-only-works-with-the-material-test/142855 "2024-08-23T15:00:05Z")

</div>

Hallo, ich verwende die neuste Version LB 1.6.03 mit meinem 30W MOPA M7 Faser Laser und erstelle gerade mit mehreren “Material Test” einige Tests auf Edelstahl platten, damit sehe wie das Material reagiert und welche Fa…

---

## [Titanium card blanks](https://forum.lightburnsoftware.com/t/titanium-card-blanks/145980)

<div class="topic-metadata">

**Author:** [@fins](https://forum.lightburnsoftware.com/u/fins)\
**Replies:** 0\
**Last updated:** [July 30, 2024, 3:58pm UTC](https://forum.lightburnsoftware.com/t/titanium-card-blanks/145980 "2024-07-30T15:58:26Z")

</div>

Anyone have a source for titanium business card blanks? There are plentiful options for aluminum and stainless steel, but haven’t found anyone selling bulk titanium blanks in the usual places.

---

## [Minimum interval \<0.001mm](https://forum.lightburnsoftware.com/t/minimum-interval-0-001mm/144202)

<div class="topic-metadata">

**Author:** [@fins](https://forum.lightburnsoftware.com/u/fins)\
**Replies:** 5\
**Last updated:** [July 17, 2024, 2:50pm UTC](https://forum.lightburnsoftware.com/t/minimum-interval-0-001mm/144202 "2024-07-17T14:50:07Z")

</div>

Hi, I’m hunting for different colors on stainless steel using a JPT M8 MOPA 20W. In the material test , I can generate patterns between 0.0001mm an 0.0010mm, however the Cut settings editor forces values of 0.001mm and …

---

## [Fiber Laser Dot Mode](https://forum.lightburnsoftware.com/t/fiber-laser-dot-mode/124186)

<div class="topic-metadata">

**Author:** [@Bulldog](https://forum.lightburnsoftware.com/u/Bulldog)\
**Replies:** 7\
**Last updated:** [February 5, 2024, 2:57pm UTC](https://forum.lightburnsoftware.com/t/fiber-laser-dot-mode/124186 "2024-02-05T14:57:08Z")

</div>

The rabbit hole keeps getting Deeper I,m seeing FB posts Of people with 30 Watt Fibers engraving images on SS using “Dot Mode” and scan offset using LightBurn For my JPT 60 watt MOPA …those options don,t even show up …

---

## [Rotary - Focus Issue](https://forum.lightburnsoftware.com/t/rotary-focus-issue/115545)

<div class="topic-metadata">

**Author:** [@szweibohmer](https://forum.lightburnsoftware.com/u/szweibohmer)\
**Replies:** 4\
**Last updated:** [November 5, 2023, 1:34am UTC](https://forum.lightburnsoftware.com/t/rotary-focus-issue/115545 "2023-11-05T01:34:20Z")

</div>

60W/JPT-MOPA with a rotary and 110mm lens. Annealing on stainless. Have a regular customer that provides me with a stainless cylinder that I am annealing their logo onto. Have done this successfully numerous times. Howev…

---

## [MOPA Q-pulse and LightBurn Material Test](https://forum.lightburnsoftware.com/t/mopa-q-pulse-and-lightburn-material-test/104576)

<div class="topic-metadata">

**Author:** [@IgorZh](https://forum.lightburnsoftware.com/u/IgorZh)\
**Replies:** 9\
**Last updated:** [July 11, 2023, 8:50pm UTC](https://forum.lightburnsoftware.com/t/mopa-q-pulse-and-lightburn-material-test/104576 "2023-07-11T20:50:01Z")

</div>

Hi all! LightBurn has an excellent tool LightBurn Material Test. It has the option to choose a dependency on Q-pulse. But I don’t understand how this can work, because in the JPT MOPA there are only certain pulse width …

---

## [Excited to get a Mopa JPT and use Lightburn but](https://forum.lightburnsoftware.com/t/excited-to-get-a-mopa-jpt-and-use-lightburn-but/95993)

<div class="topic-metadata">

**Author:** [@veselka](https://forum.lightburnsoftware.com/u/veselka)\
**Replies:** 2\
**Last updated:** [March 29, 2023, 3:17pm UTC](https://forum.lightburnsoftware.com/t/excited-to-get-a-mopa-jpt-and-use-lightburn-but/95993 "2023-03-29T15:17:30Z")

</div>

Hi I am very happy the team at lightburn have made software work with fiber lasers :slight\_smile: I am about to buy my first 30 watt JPT Mopa and hope to utilize it by helping my dog clothing store on Etsy. My plan is to…

---

## [Wisely 60W JPT MOPA stops framing after 20-60 seconds](https://forum.lightburnsoftware.com/t/wisely-60w-jpt-mopa-stops-framing-after-20-60-seconds/85789)

<div class="topic-metadata">

**Author:** [@bedwards59](https://forum.lightburnsoftware.com/u/bedwards59)\
**Replies:** 0\
**Last updated:** [December 21, 2022, 2:56pm UTC](https://forum.lightburnsoftware.com/t/wisely-60w-jpt-mopa-stops-framing-after-20-60-seconds/85789 "2022-12-21T14:56:03Z")

</div>

I am installing a Wisely 60W JPT MOPA. The laser stops framing at random times. The counter continues. If I fire the laser, it also stops at random points in the job after around 20 seconds. I have tried all the USB …

---

## [Lightburn not the same power as with Ezcad 2](https://forum.lightburnsoftware.com/t/lightburn-not-the-same-power-as-with-ezcad-2/87765)

<div class="topic-metadata">

**Author:** [@johnico](https://forum.lightburnsoftware.com/u/johnico)\
**Replies:** 14\
**Last updated:** [January 13, 2023, 3:11pm UTC](https://forum.lightburnsoftware.com/t/lightburn-not-the-same-power-as-with-ezcad-2/87765 "2023-01-13T15:11:06Z")

</div>

So I have Ezcad 2 running and working fine on my 60 watt Mopa fiber and when I connected lightburn, I’m just not getting the same buzzing sound, I get more of a hissing sound with lightburn. I just dont feel Lightburn is…

---

## [HELP! Out of nowhere LB won't connect. USB Error](https://forum.lightburnsoftware.com/t/help-out-of-nowhere-lb-wont-connect-usb-error/86013)

<div class="topic-metadata">

**Author:** [@sabrlaser](https://forum.lightburnsoftware.com/u/sabrlaser)\
**Replies:** 2\
**Last updated:** [December 23, 2022, 4:09pm UTC](https://forum.lightburnsoftware.com/t/help-out-of-nowhere-lb-wont-connect-usb-error/86013 "2022-12-23T16:09:21Z")

</div>

I could really use some help, please! I have an Omtech 60w MOPA. Everything was fine until I walked away for a break. I came back to do some more work and it suddenly showed as disconnected in lightburn. I have tried uni…

---

## [60W Omtech 60w Fiver MOPA Settings for Color Can't Find](https://forum.lightburnsoftware.com/t/60w-omtech-60w-fiver-mopa-settings-for-color-cant-find/83522)

<div class="topic-metadata">

**Author:** [@sabrlaser](https://forum.lightburnsoftware.com/u/sabrlaser)\
**Replies:** 2\
**Last updated:** [December 3, 2022, 1:22pm UTC](https://forum.lightburnsoftware.com/t/60w-omtech-60w-fiver-mopa-settings-for-color-cant-find/83522 "2022-12-03T13:22:52Z")

</div>

I have a brand new 60w Fiber Mopa. I want to print some colors. What settings are a good starting point on stainless steel? My blanks are small so I can’t run a standard test card. Where should I start? Speed: Power: …

---

## [Galvo Fiber Laser - Red Dot Alignment](https://forum.lightburnsoftware.com/t/galvo-fiber-laser-red-dot-alignment/82472)

<div class="topic-metadata">

**Author:** [@Alphonse](https://forum.lightburnsoftware.com/u/Alphonse)\
**Replies:** 0\
**Last updated:** [November 22, 2022, 1:51am UTC](https://forum.lightburnsoftware.com/t/galvo-fiber-laser-red-dot-alignment/82472 "2022-11-22T01:51:20Z")

</div>

I am trying to center and align the work table holes with the laser on my Fiber laser (SFX 60 W JPT MOPA)? I have my lens corrected and the red dot framing is good. I did use the LightBurn “Device Settings” to make sur…

---

## [Does Lightburn support MOPA laser with EMCC Controller Card](https://forum.lightburnsoftware.com/t/does-lightburn-support-mopa-laser-with-emcc-controller-card/80498)

<div class="topic-metadata">

**Author:** [@Seba1986pl](https://forum.lightburnsoftware.com/u/Seba1986pl)\
**Replies:** 0\
**Last updated:** [October 31, 2022, 12:50pm UTC](https://forum.lightburnsoftware.com/t/does-lightburn-support-mopa-laser-with-emcc-controller-card/80498 "2022-10-31T12:50:04Z")

</div>

Hello, I run into a problem with my laser Han’s Laser Mars 20J it is a MOPA laser but it seems that the lightbur can’t find my laser.

[Next page](https://forum.lightburnsoftware.com/tag/mopa/120.md?match_all_tags=true&page=1&tags%5B%5D=mopa)
