# \#neje

**URL:** https://forum.lightburnsoftware.com/tag/neje/125.md

[Latest](https://forum.lightburnsoftware.com/latest.md) · [Categories](https://forum.lightburnsoftware.com/categories.md) · [Tags](https://forum.lightburnsoftware.com/tags.md)

---

## [Neje Max E80 - HELP!!!](https://forum.lightburnsoftware.com/t/neje-max-e80-help/192033)

<div class="topic-metadata">

**Author:** [@ph\_artem2303](https://forum.lightburnsoftware.com/u/ph_artem2303)\
**Replies:** 3\
**Last updated:** [August 26, 2026, 7:10pm UTC](https://forum.lightburnsoftware.com/t/neje-max-e80-help/192033 "2026-08-26T19:10:54Z")

</div>

Please help! I have a NEJE Max 4 E80. I opened the NEJE Software and updated the laser’s firmware to the latest version. After the update, a problem appeared. The laser’s working area is 750 × 1030 mm. After updating t…

---

## [After update, won't mark the wood at all](https://forum.lightburnsoftware.com/t/after-update-wont-mark-the-wood-at-all/191447)

<div class="topic-metadata">

**Author:** [@BillPiper](https://forum.lightburnsoftware.com/u/BillPiper)\
**Replies:** 7\
**Last updated:** [July 26, 2026, 4:50am UTC](https://forum.lightburnsoftware.com/t/after-update-wont-mark-the-wood-at-all/191447 "2026-07-26T04:50:40Z")

</div>

Since the latest update I havee had issues. I do see the blue laser light speed is 150 power is 100, I use a focus block for my Neje 3 Trying to engrave and cut 3m wood. Had this laser and Lightburn for 2 yrs without is…

---

## [Lightburn, raise z for traversal moves?](https://forum.lightburnsoftware.com/t/lightburn-raise-z-for-traversal-moves/149310)

<div class="topic-metadata">

**Author:** [@Dr-Zee](https://forum.lightburnsoftware.com/u/Dr-Zee)\
**Replies:** 36\
**Last updated:** [February 17, 2026, 9:21am UTC](https://forum.lightburnsoftware.com/t/lightburn-raise-z-for-traversal-moves/149310 "2026-02-17T09:21:51Z")

</div>

When cutting a shape, the z will raise then lower between shapes. When filling a shape, if the shape has cutouts, the z remains fixed during traversal moves. Is there a way to force a z up then down during traversal mov…

---

## [Controlling a Neje master 2](https://forum.lightburnsoftware.com/t/controlling-a-neje-master-2/185978)

<div class="topic-metadata">

**Author:** [@Hermit](https://forum.lightburnsoftware.com/u/Hermit)\
**Replies:** 10\
**Last updated:** [December 18, 2025, 8:02am UTC](https://forum.lightburnsoftware.com/t/controlling-a-neje-master-2/185978 "2025-12-18T08:02:00Z")

</div>

After some frustration and upgrading my license, I can now connect LightBurn Core 2.0.05 to my neje Master 2, Waiting for connection… ok ok ok. Thats it though, nothing I do from here makes my Neje do anything. Any c…

---

## [Neje Camera rolling image error](https://forum.lightburnsoftware.com/t/neje-camera-rolling-image-error/180550)

<div class="topic-metadata">

**Author:** [@tprimus](https://forum.lightburnsoftware.com/u/tprimus)\
**Replies:** 7\
**Last updated:** [September 24, 2025, 1:23pm UTC](https://forum.lightburnsoftware.com/t/neje-camera-rolling-image-error/180550 "2025-09-24T13:23:48Z")

</div>

Just connected my new Neje 16MP cam, and facing some error in LB. With google meet the image is fine, but in LB the image is rolling somehow… Macbook Air M1, Lightburn 2.0, Osx Tahoe Any help would be great!

---

## [Quick Hardware question](https://forum.lightburnsoftware.com/t/quick-hardware-question/174432)

<div class="topic-metadata">

**Author:** [@rtguy](https://forum.lightburnsoftware.com/u/rtguy)\
**Replies:** 8\
**Last updated:** [July 2, 2025, 2:19pm UTC](https://forum.lightburnsoftware.com/t/quick-hardware-question/174432 "2025-07-02T14:19:52Z")

</div>

I having issues with an upgrade. I bought a couple of Lasertree modules. The small one is easy as it’s just a 5w 12v head. the adapter board runs fine, laser works as it should. The second one is a 24v 20w. I suspect the…

---

## [Neje 4 Max Homing Issue: Y-axis only](https://forum.lightburnsoftware.com/t/neje-4-max-homing-issue-y-axis-only/170249)

<div class="topic-metadata">

**Author:** [@cpatenall](https://forum.lightburnsoftware.com/u/cpatenall)\
**Replies:** 11\
**Last updated:** [June 12, 2025, 9:21am UTC](https://forum.lightburnsoftware.com/t/neje-4-max-homing-issue-y-axis-only/170249 "2025-06-12T09:21:29Z")

</div>

Hi. When homing my Neje 4 Max device, the actual x:y homing position should be x=0: y=460 When I send it home, it reaches the end of the y-travel and makes a brief grinding noise. When I check the “get position” functio…

---

## [Issue with the Coordinate System and Current Position](https://forum.lightburnsoftware.com/t/issue-with-the-coordinate-system-and-current-position/171776)

<div class="topic-metadata">

**Author:** [@drvopis](https://forum.lightburnsoftware.com/u/drvopis)\
**Replies:** 2\
**Last updated:** [June 3, 2025, 7:24pm UTC](https://forum.lightburnsoftware.com/t/issue-with-the-coordinate-system-and-current-position/171776 "2025-06-03T19:24:29Z")

</div>

When I press the “HOME” button, my Neje Max 4 laser with an extension moves to the correct position (bottom left), but the coordinates show that the X-axis is at 1030. Why is that? How can I fix this problem? Ple…

---

## [NEJE 4 Max Camera Calibration Doesn't Adjust Z-Axis for Material Thickness](https://forum.lightburnsoftware.com/t/neje-4-max-camera-calibration-doesnt-adjust-z-axis-for-material-thickness/172360)

<div class="topic-metadata">

**Author:** [@rootbeergoggles](https://forum.lightburnsoftware.com/u/rootbeergoggles)\
**Replies:** 5\
**Last updated:** [May 24, 2025, 10:52pm UTC](https://forum.lightburnsoftware.com/t/neje-4-max-camera-calibration-doesnt-adjust-z-axis-for-material-thickness/172360 "2025-05-24T22:52:29Z")

</div>

NEJE 4 Max GBRL controller System firmware v2.2.3 NEJE firmware v2.2.5 GRBL firmware v2.2.4 LightBurn version 1.7.08 Connected to Microsoft Surface running Windows11 via USB Issue: Setting up new Neje 4 Max to us…

---

## [Weird Lightburn behaviour when engraving arcs and circles](https://forum.lightburnsoftware.com/t/weird-lightburn-behaviour-when-engraving-arcs-and-circles/169225)

<div class="topic-metadata">

**Author:** [@msusic](https://forum.lightburnsoftware.com/u/msusic)\
**Replies:** 1\
**Last updated:** [April 2, 2025, 1:34pm UTC](https://forum.lightburnsoftware.com/t/weird-lightburn-behaviour-when-engraving-arcs-and-circles/169225 "2025-04-02T13:34:33Z")

</div>

Hello everyone, I’m new to laser cutting and engraving and I’ve encountered an issue with my Neje Max 4 with extension rail fitted. While I was sucessful at getting the laser oriented and correctly sized ($131 value set …

---

## [NEJE E40 vs A40640](https://forum.lightburnsoftware.com/t/neje-e40-vs-a40640/164414)

<div class="topic-metadata">

**Author:** [@helpfinder](https://forum.lightburnsoftware.com/u/helpfinder)\
**Replies:** 3\
**Last updated:** [February 5, 2025, 2:27pm UTC](https://forum.lightburnsoftware.com/t/neje-e40-vs-a40640/164414 "2025-02-05T14:27:08Z")

</div>

Hi guys, I am wondering which of these would be better choice - NEJE E40 vs A40640 I am running NEJE Master 2S plus with stock device and I would like to upgrade I am not sure what would be better choice - primarly I …

---

## [После часа гравировки станок останавливается](https://forum.lightburnsoftware.com/t/topic/164068)

<div class="topic-metadata">

**Author:** [@Andrey2](https://forum.lightburnsoftware.com/u/Andrey2)\
**Replies:** 1\
**Last updated:** [February 3, 2025, 11:24pm UTC](https://forum.lightburnsoftware.com/t/topic/164068 "2025-02-03T23:24:02Z")

</div>

Всем привет,станок neje гравирует 1 час и останавливается,в чем проблема? Hi all,neje machine engraves for 1 hour and stops,what is the problem?

---

## [NEJE Max4 Homing - How to avoid initial move in wrong direction?](https://forum.lightburnsoftware.com/t/neje-max4-homing-how-to-avoid-initial-move-in-wrong-direction/154656)

<div class="topic-metadata">

**Author:** [@mattbac](https://forum.lightburnsoftware.com/u/mattbac)\
**Replies:** 3\
**Last updated:** [October 27, 2024, 1:47pm UTC](https://forum.lightburnsoftware.com/t/neje-max4-homing-how-to-avoid-initial-move-in-wrong-direction/154656 "2024-10-27T13:47:34Z")

</div>

I have just set up a Neje Max 4 and all works well except: when homing, all three axes move a few steps in the wrong direction before reversing and moving the right way to the limit switch. When the toolhead is far from…

---

## [A40630 Laser not turning on](https://forum.lightburnsoftware.com/t/a40630-laser-not-turning-on/147321)

<div class="topic-metadata">

**Author:** [@Mike-Bd](https://forum.lightburnsoftware.com/u/Mike-Bd)\
**Replies:** 2\
**Last updated:** [August 15, 2024, 9:24pm UTC](https://forum.lightburnsoftware.com/t/a40630-laser-not-turning-on/147321 "2024-08-15T21:24:46Z")

</div>

I’ve bought a new NEJE 3 pro wth a A40630. Lightburn controls the NEJE 3, but the laser doesn’t fire up. Using the ‘fire’ button in the software seems to start the fan up but no laser appears. I’m using a MacBook Pro …

---

## [MY NEJE disconnected with Light burn and not getting connecting again](https://forum.lightburnsoftware.com/t/my-neje-disconnected-with-light-burn-and-not-getting-connecting-again/142231)

<div class="topic-metadata">

**Author:** [@Aakash](https://forum.lightburnsoftware.com/u/Aakash)\
**Replies:** 6\
**Last updated:** [June 25, 2024, 6:12pm UTC](https://forum.lightburnsoftware.com/t/my-neje-disconnected-with-light-burn-and-not-getting-connecting-again/142231 "2024-06-25T18:12:12Z")

</div>

Hi, My NEJE was connected to Lightburn and was functioning well but suddenly it get disconnected and not getting connect again, I tried to reboot my Mac, remove the device add it again but still nothing working. I am us…

---

## [Sharing library (NEJE 20W)](https://forum.lightburnsoftware.com/t/sharing-library-neje-20w/36612)

<div class="topic-metadata">

**Author:** [@OPatrick](https://forum.lightburnsoftware.com/u/OPatrick)\
**Replies:** 5\
**Last updated:** [May 25, 2024, 12:41pm UTC](https://forum.lightburnsoftware.com/t/sharing-library-neje-20w/36612 "2024-05-25T12:41:47Z")

</div>

Hello, Anybody having a NEJE 20W happy to share its material libraries? Thanks a lot to help get on run.

---

## [Neje laser not connected in lightburn](https://forum.lightburnsoftware.com/t/neje-laser-not-connected-in-lightburn/132886)

<div class="topic-metadata">

**Author:** [@lauranebzh](https://forum.lightburnsoftware.com/u/lauranebzh)\
**Replies:** 22\
**Last updated:** [March 15, 2024, 4:02pm UTC](https://forum.lightburnsoftware.com/t/neje-laser-not-connected-in-lightburn/132886 "2024-03-15T16:02:31Z")

</div>

Neje laser cutter not recognized in lightburn I have just acquired Lightburn (license key) 1.5.02. On the trial version I had no problems of recognise. However, it is impossible to connect my laser cutter to the license…

---

## [NEJE Max 4 A40640 Question Answer?](https://forum.lightburnsoftware.com/t/neje-max-4-a40640-question-answer/128084)

<div class="topic-metadata">

**Author:** [@CreativityTreeProductions](https://forum.lightburnsoftware.com/u/CreativityTreeProductions)\
**Replies:** 8\
**Last updated:** [February 9, 2024, 2:49am UTC](https://forum.lightburnsoftware.com/t/neje-max-4-a40640-question-answer/128084 "2024-02-09T02:49:01Z")

</div>

Hello all, I am getting fairly proficient with this setup. I bought it on amazon and so far I like it. I’m hoping a few others out there may also use this machines and we could have kind of a question answer thread her…

---

## [Image incorrect position, Shapes correct](https://forum.lightburnsoftware.com/t/image-incorrect-position-shapes-correct/126136)

<div class="topic-metadata">

**Author:** [@monny](https://forum.lightburnsoftware.com/u/monny)\
**Replies:** 2\
**Last updated:** [January 31, 2024, 12:26pm UTC](https://forum.lightburnsoftware.com/t/image-incorrect-position-shapes-correct/126136 "2024-01-31T12:26:59Z")

</div>

Hi, i am struggling to get my image in the right spot. The Frame option (with blue laser point) shows the right position, when i draw a rectangle it is positioned correctly but the image is burnt about 5 cm too far righ…

---

## [Neje E80 module](https://forum.lightburnsoftware.com/t/neje-e80-module/116322)

<div class="topic-metadata">

**Author:** [@bLouChip](https://forum.lightburnsoftware.com/u/bLouChip)\
**Replies:** 10\
**Last updated:** [December 7, 2023, 2:33pm UTC](https://forum.lightburnsoftware.com/t/neje-e80-module/116322 "2023-12-07T14:33:18Z")

</div>

I recently bought a neje E80 laser module, quad diode, approx 20W optical output. I can report that its almost exactly twice as powerful as the A4060 dual diode, which is very nice. I like it. It comes with built-in air …

---

## [Power configuration lightburn with neje 2s max with a40640 laser diode](https://forum.lightburnsoftware.com/t/power-configuration-lightburn-with-neje-2s-max-with-a40640-laser-diode/119126)

<div class="topic-metadata">

**Author:** [@laurane](https://forum.lightburnsoftware.com/u/laurane)\
**Replies:** 1\
**Last updated:** [December 4, 2023, 6:37am UTC](https://forum.lightburnsoftware.com/t/power-configuration-lightburn-with-neje-2s-max-with-a40640-laser-diode/119126 "2023-12-04T06:37:17Z")

</div>

hello I’m a beginner on lightburn and I’ve read a lot of content on setting speed and power. But the question of parameter priority remains unclear to me. in grbl the speed $30 is apparently given in mm/s and in light…

---

## [Skewed engraving in FILL mode](https://forum.lightburnsoftware.com/t/skewed-engraving-in-fill-mode/116783)

<div class="topic-metadata">

**Author:** [@demetrisc](https://forum.lightburnsoftware.com/u/demetrisc)\
**Replies:** 18\
**Last updated:** [November 17, 2023, 8:20pm UTC](https://forum.lightburnsoftware.com/t/skewed-engraving-in-fill-mode/116783 "2023-11-17T20:20:24Z")

</div>

Dear Lighburn users, I am new to laser machines so please excuse any obvious or silly comments. I have recently bought the NEJE Max 4 with E80 diode module. I am using LightBurn 1.4.03 on a MacBook Pro with Apple M1, 16…

---

## [Neje 3s Max e40 not finishing cuts](https://forum.lightburnsoftware.com/t/neje-3s-max-e40-not-finishing-cuts/102604)

<div class="topic-metadata">

**Author:** [@fastestcamel](https://forum.lightburnsoftware.com/u/fastestcamel)\
**Replies:** 5\
**Last updated:** [June 21, 2023, 2:19am UTC](https://forum.lightburnsoftware.com/t/neje-3s-max-e40-not-finishing-cuts/102604 "2023-06-21T02:19:09Z")

</div>

I feel this is a Lightburn settings problem. I’m cutting 3mm plywood with an e40 laser module and there are some curves the laser seems to not completely cut. It only seems to happen on curves near the end of the shape. …

---

## [Low cutting capacity NEJE Master 2s plus](https://forum.lightburnsoftware.com/t/low-cutting-capacity-neje-master-2s-plus/41204)

<div class="topic-metadata">

**Author:** [@tctdllreg](https://forum.lightburnsoftware.com/u/tctdllreg)\
**Replies:** 20\
**Last updated:** [March 31, 2023, 2:14pm UTC](https://forum.lightburnsoftware.com/t/low-cutting-capacity-neje-master-2s-plus/41204 "2023-03-31T14:14:57Z")

</div>

Hi community, I’m trying to cut 3 mm MDF. Settings I use: 400 mm/min, 100% power, 22 passes, additional air assist (a compressor with 250 l/h flow). It does not cut through all the times (I mean sometimes it does, some…

---

## [New User - Error 9](https://forum.lightburnsoftware.com/t/new-user-error-9/93172)

<div class="topic-metadata">

**Author:** [@Rosy](https://forum.lightburnsoftware.com/u/Rosy)\
**Replies:** 1\
**Last updated:** [February 27, 2023, 6:12pm UTC](https://forum.lightburnsoftware.com/t/new-user-error-9/93172 "2023-02-27T18:12:08Z")

</div>

hi sorry you can help i have problem my machine longer laser have err0r 9

---

## [Laser Modules from one brand on another brand rig and controller](https://forum.lightburnsoftware.com/t/laser-modules-from-one-brand-on-another-brand-rig-and-controller/87207)

<div class="topic-metadata">

**Author:** [@RoGueMS](https://forum.lightburnsoftware.com/u/RoGueMS)\
**Replies:** 12\
**Last updated:** [January 6, 2023, 4:11pm UTC](https://forum.lightburnsoftware.com/t/laser-modules-from-one-brand-on-another-brand-rig-and-controller/87207 "2023-01-06T16:11:39Z")

</div>

Hello everyone, I’ve got a question that i can’t find a straight answer anywhere online. I bought a Neje Master 2S with a N40630 (7.5W Output) laser module with a usefull area of 170x170mm, i’ve modded it quite alot ov…

---

## [NEJE 2S Max + Ortur Rotary - Getting "diagonally distorted images"](https://forum.lightburnsoftware.com/t/neje-2s-max-ortur-rotary-getting-diagonally-distorted-images/75609)

<div class="topic-metadata">

**Author:** [@bdrayer](https://forum.lightburnsoftware.com/u/bdrayer)\
**Replies:** 0\
**Last updated:** [September 5, 2022, 1:29am UTC](https://forum.lightburnsoftware.com/t/neje-2s-max-ortur-rotary-getting-diagonally-distorted-images/75609 "2022-09-05T01:29:35Z")

</div>

Hi all, Machine: Neje 2S Max Rotary: Ortur Rotary Material being burned - Tumbler Hoping for a bit of help. I’ve been trying to burn an image on a tumbler, and I got it to work fine on a “trial tumbler” which was sim…

---

## [Laser flashes above 60% power](https://forum.lightburnsoftware.com/t/laser-flashes-above-60-power/74975)

<div class="topic-metadata">

**Author:** [@Kirolos](https://forum.lightburnsoftware.com/u/Kirolos)\
**Replies:** 3\
**Last updated:** [August 28, 2022, 9:42am UTC](https://forum.lightburnsoftware.com/t/laser-flashes-above-60-power/74975 "2022-08-28T09:42:28Z")

</div>

Hello guys Hope you are doing well. I have this problem of the laser only flashes when i hit the start botton, specialy when the power is above 60%.

---

## [Can't get laser to turn off when not in use](https://forum.lightburnsoftware.com/t/cant-get-laser-to-turn-off-when-not-in-use/74370)

<div class="topic-metadata">

**Author:** [@WireWrangler](https://forum.lightburnsoftware.com/u/WireWrangler)\
**Replies:** 12\
**Last updated:** [August 21, 2022, 1:03pm UTC](https://forum.lightburnsoftware.com/t/cant-get-laser-to-turn-off-when-not-in-use/74370 "2022-08-21T13:03:10Z")

</div>

I have a new NEJE 3 max with a A40640 laser module. I have set up the neje software and updated the firmware and all works on that side. When switching to GRBL mode and using Lightburn I cannot seem to get the laser to d…

---

## [Neje a40640 stainless steel problems](https://forum.lightburnsoftware.com/t/neje-a40640-stainless-steel-problems/70884)

<div class="topic-metadata">

**Author:** [@p10driver](https://forum.lightburnsoftware.com/u/p10driver)\
**Replies:** 1\
**Last updated:** [July 19, 2022, 9:19pm UTC](https://forum.lightburnsoftware.com/t/neje-a40640-stainless-steel-problems/70884 "2022-07-19T21:19:45Z")

</div>

Hello everyone, I have the Neje max 3 A40640 and am now trying to engrave a little with stainless steel. Unfortunately I don’t really have any success. The first time it works really well and the second time it’s extr…

[Next page](https://forum.lightburnsoftware.com/tag/neje/125.md?match_all_tags=true&page=1&tags%5B%5D=neje)
