;Header Start
;header_type: laser
;tool_head: levelTwoLaserToolheadForSM2
;machine: A350
;renderMethod: line
;file_total_lines: 49
;estimated_time(s): 50.546
;is_rotate: true
;diameter: 50
;max_x(mm): 0
;max_y(mm): 50.005
;max_z(mm): 0
;max_b(mm): 180.089
;min_x(mm): 0
;min_y(mm): 50
;min_b(mm): -179.75900000000001
;min_z(mm): 0
;work_speed(mm/minute): 500
;jog_speed(mm/minute): 3000
;power(%): 1
;work_size_x: 320
;work_size_y: 350
;origin: bottom-center
;thumbnail:
[REMOVED TO REDUCE FILESIZE]
;Header End

; Laser multi-pass, pass 1 with Z = 0
; G-code for laser engraving
; Generated by Snapmaker Luban
; G-code START <<<
G90					;ABS positioning/coords
G21					;Millimeter units
M106 P0 S255			;FAN Index_0 ON, Full speed
G0 F3000				;Set RAPID speed to 3000mm/min
G1 F500				;Set FEEDRATE to 500mm/min
G0 X0.00				;RAPID to X:0
G0 Y50.01 B-179.76		;RAPID to Y50.01, ROTATE B -179.76°
M3 P1 S2				;Laser ON, Power 1%, Power, S, as 8Bit equiv [int]
M3					;Laser ON, but could be quiery
G1 Y50.01 B-0.66			;FEED @ Y50.01, ROTATE B to -0.66°
G1 Y50.01 B180.09			;FEED,@ Y50.01, ROTATE B to 180.09°
M5					;Laser OFF
G0 Y50.00 B0.17			;RAPID to Y50.00, B0.17°
G92 B0.17				;Specify B axis is at 0.17°
M107 P0				;FAN Index_0 OFF
; G-code END <<<
G91					;Relative position mode
G0 Z0 F150				;RAPID to Z0 @ 150mm/min
G90					;ABS positioning/coords