{
    "Name": "GRBL",
    "Settings": [
        {
            "Desc": "Status: Position reporting ($10)",
            "ID": "0xa0000",
            "Value": "Machine Position"
        },
        {
            "Desc": "Status: Show buffer data ($10)",
            "ID": "0xa0001",
            "Value": true
        },
        {
            "Desc": "Junction deviation (mm) ($11)",
            "ID": "0xb",
            "Value": 0.009999999776482582
        },
        {
            "Desc": "Arc tolerance (mm) ($12)",
            "ID": "0xc",
            "Value": 0.0020000000949949026
        },
        {
            "Desc": "Report inches ($13)",
            "ID": "0xd",
            "Value": false
        },
        {
            "Desc": "Soft limits ($20)",
            "ID": "0x14",
            "Value": false
        },
        {
            "Desc": "Hard limits ($21)",
            "ID": "0x15",
            "Value": true
        },
        {
            "Desc": "Homing cycle ($22)",
            "ID": "0x16",
            "Value": true
        },
        {
            "Desc": "Homing feed rate (slow) (mm/min) ($24)",
            "ID": "0x18",
            "Value": 1500
        },
        {
            "Desc": "Homing seek rate (fast) (mm/min) ($25)",
            "ID": "0x19",
            "Value": 4500
        },
        {
            "Desc": "Homing debounce (ms) ($26)",
            "ID": "0x1a",
            "Value": 20
        },
        {
            "Desc": "Homing pull-off (mm) ($27)",
            "ID": "0x1b",
            "Value": 5
        },
        {
            "Desc": "Max spindle speed (RPM), S-Value max ($30)",
            "ID": "0x1e",
            "Value": 1000
        },
        {
            "Desc": "Min spindle speed (RPM), S-Value min ($31)",
            "ID": "0x1f",
            "Value": 0
        },
        {
            "Desc": "Laser mode enable ($32)",
            "ID": "0x20",
            "Value": true
        },
        {
            "Desc": "Step pulse (microseconds) ($0)",
            "ID": "0x0",
            "Value": 10
        },
        {
            "Desc": "Step idle delay (ms) ($1)",
            "ID": "0x1",
            "Value": 250
        },
        {
            "Desc": "Step enable invert ($4)",
            "ID": "0x4",
            "Value": false
        },
        {
            "Desc": "Limit pins invert ($5)",
            "ID": "0x5",
            "Value": false
        },
        {
            "Desc": "Probe pin invert ($6)",
            "ID": "0x6",
            "Value": false
        },
        {
            "Desc": "X Step pin invert ($2)",
            "ID": "0x20000",
            "Value": false
        },
        {
            "Desc": "X Direction pin invert ($3)",
            "ID": "0x30000",
            "Value": false
        },
        {
            "Desc": "X Homing direction invert ($23)",
            "ID": "0x170000",
            "Value": true
        },
        {
            "Desc": "X Steps per mm ($100)",
            "ID": "0x64",
            "Value": 80
        },
        {
            "Desc": "X Max rate (mm/min) ($110)",
            "ID": "0x6e",
            "Value": 20000
        },
        {
            "Desc": "X Acceleration (mm/sec^2) ($120)",
            "ID": "0x78",
            "Value": 500
        },
        {
            "Desc": "X Max travel (mm) ($130)",
            "ID": "0x82",
            "Value": 150
        },
        {
            "Desc": "Y Step pin invert ($2)",
            "ID": "0x20001",
            "Value": false
        },
        {
            "Desc": "Y Direction pin invert ($3)",
            "ID": "0x30001",
            "Value": false
        },
        {
            "Desc": "Y Homing direction invert ($23)",
            "ID": "0x170001",
            "Value": true
        },
        {
            "Desc": "Y Steps per mm ($101)",
            "ID": "0x65",
            "Value": 80
        },
        {
            "Desc": "Y Max rate (mm/min) ($111)",
            "ID": "0x6f",
            "Value": 20000
        },
        {
            "Desc": "Y Acceleration (mm/sec^2) ($121)",
            "ID": "0x79",
            "Value": 500
        },
        {
            "Desc": "Y Max travel (mm) ($131)",
            "ID": "0x83",
            "Value": 150
        },
        {
            "Desc": "Z Step pin invert ($2)",
            "ID": "0x20002",
            "Value": false
        },
        {
            "Desc": "Z Direction pin invert ($3)",
            "ID": "0x30002",
            "Value": true
        },
        {
            "Desc": "Z Homing direction invert ($23)",
            "ID": "0x170002",
            "Value": true
        },
        {
            "Desc": "Z Steps per mm ($102)",
            "ID": "0x66",
            "Value": 800
        },
        {
            "Desc": "Z Max rate (mm/min) ($112)",
            "ID": "0x70",
            "Value": 1000
        },
        {
            "Desc": "Z Acceleration (mm/sec^2) ($122)",
            "ID": "0x7a",
            "Value": 500
        },
        {
            "Desc": "Z Max travel (mm) ($132)",
            "ID": "0x84",
            "Value": 148
        },
        {
            "Desc": "A Step pin invert ($2)",
            "ID": "0x20003",
            "Value": false
        },
        {
            "Desc": "A Direction pin invert ($3)",
            "ID": "0x30003",
            "Value": false
        },
        {
            "Desc": "A Homing direction invert ($23)",
            "ID": "0x170003",
            "Value": false
        },
        {
            "Desc": "A Steps per mm ($103)",
            "ID": "0x67",
            "Value": 17.799999237060547
        },
        {
            "Desc": "A Max rate (mm/min) ($113)",
            "ID": "0x71",
            "Value": 10000
        },
        {
            "Desc": "A Acceleration (mm/sec^2) ($123)",
            "ID": "0x7b",
            "Value": 500
        },
        {
            "Desc": "A Max travel (mm) ($133)",
            "ID": "0x85",
            "Value": 9999
        }
    ]
}