<?xml version="1.0" encoding="UTF-8"?>
<LightBurnLibrary DisplayName="Gweike-G2Pro-30W-150mm-merged">
    <Material name="3D-Sliced Metal">
        <Entry Thickness="-1.0000" Desc="adjust # of passes as needed" NoThickTitle="3D-Relief engrave">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="3D-Sliced Metal/3D-Relief engrave/adjust # of passes as needed"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="3500"/>
                <QPulseWidth Value="100"/>
                <numPasses Value="500"/>
                <anglePerPass Value="15"/>
                <interval Value="0.05"/>
                <subname Value="3D Slice"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="3dslice"/>
                <cleanupPass Value="1"/>
                <dpi Value="508"/>
                <SubLayer type="Scan" index="1">
                    <maxPower Value="55"/>
                    <maxPower2 Value="20"/>
                    <speed Value="200"/>
                    <frequency Value="80000"/>
                    <numPasses Value="20"/>
                    <isCleanup Value="1"/>
                    <interval Value="0.04"/>
                    <subname Value="Cleanup"/>
                </SubLayer>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Alu">
        <Entry Thickness="1.5000" Desc="Cut (let run as long as needed)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Alu/1.5000/Cut (let run as long as needed)"/>
                <minPower Value="5"/>
                <maxPower Value="95"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <kerf Value="0.1"/>
                <frequency Value="30000"/>
                <wobbleStep Value="0.04"/>
                <wobbleSize Value="0.2"/>
                <wobbleEnable Value="1"/>
                <anglePerPass Value="13.7"/>
                <dotTime Value="1"/>
                <bidir Value="0"/>
                <interval Value="0.051"/>
                <angle Value="90"/>
                <priority Value="0"/>
                <globalRepeat Value="3000"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Black Paper">
        <Entry Thickness="0.3000" Desc="Barely Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Paper/0.3000/Barely Cut"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <kerf Value="-0.075"/>
                <frequency Value="30000"/>
                <overscan Value="0"/>
                <interval Value="0.9"/>
                <priority Value="0"/>
                <globalRepeat Value="10"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.3000" Desc="Clean Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Paper/0.3000/Clean Cut"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <kerf Value="-0.075"/>
                <frequency Value="50000"/>
                <wobbleStep Value="0.04"/>
                <wobbleSize Value="0.01"/>
                <overscan Value="0"/>
                <interval Value="0.9"/>
                <priority Value="0"/>
                <globalRepeat Value="6"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Brass">
        <Entry Thickness="0.5000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Brass/0.5000/Cut"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="3000"/>
                <kerf Value="0.05"/>
                <wobbleStep Value="0.06"/>
                <wobbleEnable Value="1"/>
                <dotTime Value="1"/>
                <priority Value="0"/>
                <globalRepeat Value="120"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="1.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Brass/1.0000/Cut"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="3000"/>
                <kerf Value="0.1"/>
                <wobbleStep Value="0.04"/>
                <wobbleSize Value="0.2"/>
                <wobbleEnable Value="1"/>
                <dotTime Value="1"/>
                <priority Value="0"/>
                <globalRepeat Value="200"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Meh..." NoThickTitle="Grayscale Image">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Brass/Grayscale Image/Meh..."/>
                <minPower Value="22"/>
                <maxPower Value="60"/>
                <maxPower2 Value="20"/>
                <speed Value="5000"/>
                <frequency Value="40000"/>
                <interval Value="0.04"/>
                <subname Value="3D Slice"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="grayscale"/>
                <dpi Value="635"/>
                <SubLayer type="Scan" index="1">
                    <suboutput Value="0"/>
                    <minPower Value="15"/>
                    <maxPower Value="15"/>
                    <maxPower2 Value="20"/>
                    <speed Value="2400"/>
                    <frequency Value="35000"/>
                    <numPasses Value="10"/>
                    <anglePerPass Value="30"/>
                    <isCleanup Value="1"/>
                    <floodFill Value="1"/>
                    <interval Value="0.03"/>
                    <angle Value="45"/>
                    <subname Value="Cleanup"/>
                </SubLayer>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Coated Aluminum">
        <Entry Thickness="-1.0000" Desc="Deep Marking" NoThickTitle="White">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Coated Aluminum/White/Deep Marking"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="20"/>
                <speed Value="5000"/>
                <kerf Value="0.1"/>
                <frequency Value="80000"/>
                <wobbleStep Value="0.04"/>
                <wobbleSize Value="0.15"/>
                <wobbleEnable Value="1"/>
                <numPasses Value="10"/>
                <anglePerPass Value="13.7"/>
                <dotTime Value="1"/>
                <bidir Value="0"/>
                <interval Value="0.051"/>
                <angle Value="90"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="PLA 3D Print">
        <Entry Thickness="-1.0000" Desc="Light Marking" NoThickTitle="Black">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PLA 3D Print/Black/Light Marking"/>
                <maxPower Value="45"/>
                <maxPower2 Value="20"/>
                <speed Value="5000"/>
                <numPasses Value="5"/>
                <dotTime Value="1"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Strong Marking" NoThickTitle="Black">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PLA 3D Print/Black/Strong Marking"/>
                <maxPower Value="55"/>
                <maxPower2 Value="20"/>
                <speed Value="5000"/>
                <numPasses Value="10"/>
                <dotTime Value="1"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Powder Coated Metal">
        <Entry Thickness="-1.0000" Desc="50% Marking Cross Hatch" NoThickTitle="Black">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Powder Coated Metal/Black/50% Marking Cross Hatch"/>
                <maxPower Value="85"/>
                <maxPower2 Value="20"/>
                <speed Value="2000"/>
                <numPasses Value="10"/>
                <anglePerPass Value="90"/>
                <dotTime Value="1"/>
                <interval Value="0.2"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Strong Marking" NoThickTitle="Black">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Powder Coated Metal/Black/Strong Marking"/>
                <maxPower Value="85"/>
                <maxPower2 Value="20"/>
                <speed Value="2000"/>
                <frequency Value="40000"/>
                <numPasses Value="4"/>
                <anglePerPass Value="10"/>
                <dotTime Value="1"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="SMD Stencil Sheet">
        <Entry Thickness="0.1500" Desc="Cut clean">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="SMD Stencil Sheet/0.1500/Cut clean"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <kerf Value="-0.075"/>
                <wobbleStep Value="0.04"/>
                <wobbleSize Value="0.01"/>
                <numPasses Value="2"/>
                <overscan Value="0"/>
                <interval Value="0.9"/>
                <priority Value="0"/>
                <globalRepeat Value="55"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <SubLayer type="Cut" index="1">
                    <suboutput Value="0"/>
                    <minPower Value="10"/>
                    <maxPower Value="0"/>
                    <maxPower2 Value="20"/>
                    <speed Value="5"/>
                </SubLayer>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.1500" Desc="Cut for real">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="SMD Stencil Sheet/0.1500/Cut for real"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <kerf Value="-0.075"/>
                <wobbleStep Value="0.04"/>
                <wobbleSize Value="0.01"/>
                <numPasses Value="3"/>
                <overscan Value="0"/>
                <interval Value="0.9"/>
                <priority Value="0"/>
                <globalRepeat Value="50"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <SubLayer type="Cut" index="1">
                    <suboutput Value="0"/>
                    <minPower Value="10"/>
                    <maxPower Value="0"/>
                    <maxPower2 Value="20"/>
                    <speed Value="5"/>
                </SubLayer>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.1500" Desc="Engrave bright">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="SMD Stencil Sheet/0.1500/Engrave bright"/>
                <minPower Value="35"/>
                <maxPower Value="45"/>
                <maxPower2 Value="20"/>
                <speed Value="2000"/>
                <frequency Value="50000"/>
                <interval Value="0.01"/>
                <subname Value="3D Slice"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="threshold"/>
                <dpi Value="2540"/>
                <SubLayer type="Scan" index="1">
                    <suboutput Value="0"/>
                    <minPower Value="15"/>
                    <maxPower Value="15"/>
                    <maxPower2 Value="20"/>
                    <speed Value="2400"/>
                    <frequency Value="35000"/>
                    <numPasses Value="10"/>
                    <anglePerPass Value="30"/>
                    <isCleanup Value="1"/>
                    <floodFill Value="1"/>
                    <interval Value="0.03"/>
                    <angle Value="45"/>
                    <subname Value="Cleanup"/>
                </SubLayer>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.1500" Desc="Engrave brighter">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="SMD Stencil Sheet/0.1500/Engrave brighter"/>
                <minPower Value="35"/>
                <maxPower Value="35"/>
                <maxPower2 Value="20"/>
                <speed Value="2000"/>
                <frequency Value="50000"/>
                <interval Value="0.01"/>
                <subname Value="3D Slice"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="threshold"/>
                <dpi Value="2540"/>
                <SubLayer type="Scan" index="1">
                    <suboutput Value="0"/>
                    <minPower Value="15"/>
                    <maxPower Value="15"/>
                    <maxPower2 Value="20"/>
                    <speed Value="2400"/>
                    <frequency Value="35000"/>
                    <numPasses Value="10"/>
                    <anglePerPass Value="30"/>
                    <isCleanup Value="1"/>
                    <floodFill Value="1"/>
                    <interval Value="0.03"/>
                    <angle Value="45"/>
                    <subname Value="Cleanup"/>
                </SubLayer>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Stainless">
        <Entry Thickness="0.7500" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Stainless/0.7500/Cut"/>
                <minPower Value="40"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="5000"/>
                <kerf Value="0.1"/>
                <wobbleStep Value="0.04"/>
                <wobbleSize Value="0.2"/>
                <wobbleEnable Value="1"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.43"/>
                <priority Value="0"/>
                <globalRepeat Value="500"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Dark" NoThickTitle="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Stainless/Engrave/Dark"/>
                <maxPower Value="60"/>
                <maxPower2 Value="20"/>
                <speed Value="2000"/>
                <numPasses Value="5"/>
                <dotTime Value="1"/>
                <interval Value="0.05"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Geil" NoThickTitle="Grayscale Image">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Stainless/Grayscale Image/Geil"/>
                <minPower Value="25"/>
                <maxPower Value="80"/>
                <maxPower2 Value="20"/>
                <speed Value="220"/>
                <frequency Value="40000"/>
                <overscanPercent Value="50"/>
                <dotWidth Value="0.07"/>
                <interval Value="0.06"/>
                <angle Value="90"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="grayscale"/>
                <dpi Value="423"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="wtf" NoThickTitle="Grayscale Image">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Stainless/Grayscale Image/wtf"/>
                <minPower Value="25"/>
                <maxPower Value="80"/>
                <maxPower2 Value="20"/>
                <speed Value="220"/>
                <frequency Value="40000"/>
                <overscanPercent Value="50"/>
                <dotWidth Value="0.07"/>
                <interval Value="0.06"/>
                <angle Value="90"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="grayscale"/>
                <dpi Value="423.333"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Embossing Stamp" NoThickTitle="Deep Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Stainless/Deep Engrave/Embossing Stamp"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="2000"/>
                <numPasses Value="25"/>
                <anglePerPass Value="15"/>
                <dotTime Value="1"/>
                <crossHatch Value="1"/>
                <interval Value="0.04"/>
                <autoRotate Value="1"/>
                <priority Value="0"/>
                <globalRepeat Value="50"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <SubLayer type="Scan" index="1">
                    <maxPower Value="65"/>
                    <maxPower2 Value="20"/>
                    <speed Value="1000"/>
                    <frequency Value="60000"/>
                    <numPasses Value="5"/>
                    <crossHatch Value="1"/>
                    <interval Value="0.02"/>
                </SubLayer>
            </CutSetting>
        </Entry>
    </Material>
</LightBurnLibrary>