{
    "Ball End": {
        "{4b11d70b-7c4f-406e-8976-e6e64561bc1c}": {
            "Category": "Ball End",
            "Diameter": 3,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 15,
            "Length": 22,
            "MetricTool": true,
            "Name": "Ball 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 1.2000000476837158,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Ball Mill",
            "Vendor": ""
        },
        "{75285a01-10a0-43b8-a139-0c8060727572}": {
            "Category": "Ball End",
            "Diameter": 3.174999952316284,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 16,
            "Length": 22.225000381469727,
            "MetricTool": false,
            "Name": "Ball 1/8\" shank",
            "Notes": "Blue case",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 1.2699999809265137,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Ball Mill",
            "Vendor": ""
        },
        "{99a1526c-9f42-4af8-ba33-db06df5bdc8c}": {
            "Category": "Ball End",
            "Diameter": 2,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 14,
            "Length": 22,
            "MetricTool": true,
            "Name": "Ball 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 0.800000011920929,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Ball Mill",
            "Vendor": ""
        },
        "{d3697db6-4f98-49da-a4b1-36e4d1ce39f4}": {
            "Category": "Ball End",
            "Diameter": 6.349999904632568,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 17,
            "Length": 19.049999237060547,
            "MetricTool": false,
            "Name": "Ball 1/4\" shank",
            "Notes": "Yellow",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 2.5399999618530273,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Ball Mill",
            "Vendor": ""
        }
    },
    "Cove Box": {
        "{08b1dd25-2b76-4cf8-b168-5d9a81c69f47}": {
            "Category": "Cove Box",
            "Diameter": 6.349999904632568,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 24,
            "Length": 6.349999904632568,
            "MetricTool": false,
            "Name": "Bull 1/4\" shank",
            "Notes": "Cove Box",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 3.174999952316284,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 2000,
            "StepOver": 2.5399999618530273,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{2402c454-d016-4a58-af65-158cce5b5737}": {
            "Category": "Cove Box",
            "Diameter": 15.875,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 28,
            "Length": 15.875,
            "MetricTool": false,
            "Name": "Bull 1/4\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 7.9375,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 2000,
            "StepOver": 6.349999904632568,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{3081ead9-03be-43f2-a125-a332bf5a27b7}": {
            "Category": "Cove Box",
            "Diameter": 9.524999618530273,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 26,
            "Length": 9.524999618530273,
            "MetricTool": false,
            "Name": "Bull 1/4\" shank",
            "Notes": "Cove Box",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 4.762499809265137,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 2000,
            "StepOver": 3.81000018119812,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{40b4a039-3f3d-4b7d-a202-f103086042d2}": {
            "Category": "Cove Box",
            "Diameter": 22.225000381469727,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 30,
            "Length": 22.225000381469727,
            "MetricTool": false,
            "Name": "Bull 1/4\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 11.112500190734863,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 2000,
            "StepOver": 8.889999389648438,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{74ff891d-dff2-4282-be1d-c6f314031f16}": {
            "Category": "Cove Box",
            "Diameter": 7.9375,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 25,
            "Length": 7.9375,
            "MetricTool": false,
            "Name": "Bull 1/4\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 3.96875,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 2000,
            "StepOver": 3.174999952316284,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{a5cd0613-720b-4b04-ae06-bfeedcd7950a}": {
            "Category": "Cove Box",
            "Diameter": 12.699999809265137,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 27,
            "Length": 12.699999809265137,
            "MetricTool": false,
            "Name": "Bull 1/4\" shank",
            "Notes": "Cove Box",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 6.349999904632568,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 2000,
            "StepOver": 5.079999923706055,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{aba68cdb-aa7f-4c76-912b-87c468413d9e}": {
            "Category": "Cove Box",
            "Diameter": 19.049999237060547,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 29,
            "Length": 19.049999237060547,
            "MetricTool": false,
            "Name": "Bull 1/4\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 9.524999618530273,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 2000,
            "StepOver": 7.62000036239624,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{e9616610-66b7-4412-9abf-7cd99cd2ba75}": {
            "Category": "Cove Box",
            "Diameter": 25.399999618530273,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 0,
            "Length": 25.399999618530273,
            "MetricTool": false,
            "Name": "Bull 1/4\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 12.699999809265137,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 2000,
            "StepOver": 10.15999984741211,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        }
    },
    "Drill Bits": {
        "{1eb43614-f64e-412c-b855-edb24ccdc60a}": {
            "Category": "Drill Bits",
            "Diameter": 1.7000000476837158,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 37,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 0.6800000071525574,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{5549f9cb-0f76-4deb-a962-b27b105b0963}": {
            "Category": "Drill Bits",
            "Diameter": 2.4000000953674316,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 42,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 0.9599999785423279,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{5997f617-979e-4773-bd23-1f6545a67225}": {
            "Category": "Drill Bits",
            "Diameter": 1.899999976158142,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 39,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 0.7599999904632568,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{7164ec25-c9c6-4aa3-81e4-8de140a7a91a}": {
            "Category": "Drill Bits",
            "Diameter": 1.7999999523162842,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 38,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 0.7200000286102295,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{7f000bac-4908-4fb1-827c-81ac9126883d}": {
            "Category": "Drill Bits",
            "Diameter": 2,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 40,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 0.800000011920929,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{8c6afc15-c191-4dbb-9b48-2aeca351aa92}": {
            "Category": "Drill Bits",
            "Diameter": 3.174999952316284,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 45,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 1.2699999809265137,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{9b4ad2bc-1e6d-452d-93aa-76f58f02e40e}": {
            "Category": "Drill Bits",
            "Diameter": 1.600000023841858,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 36,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Blue Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 0.6399999856948853,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{9c79a9a0-055d-4de4-9972-a8a554797738}": {
            "Category": "Drill Bits",
            "Diameter": 2.5,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 43,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 1,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{af2a8f7f-4013-4c9b-a664-cd87c408badc}": {
            "Category": "Drill Bits",
            "Diameter": 2.200000047683716,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 41,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shaft",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 0.8799999952316284,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{df29a42a-bc7c-494a-bb8d-ceb636876ebc}": {
            "Category": "Drill Bits",
            "Diameter": 1.5,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 35,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 0.6000000238418579,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        },
        "{fefb609d-be7f-4de8-92c0-e8d335317115}": {
            "Category": "Drill Bits",
            "Diameter": 3,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 118,
            "Index": 44,
            "Length": 12,
            "MetricTool": true,
            "Name": "Drill 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 1.2000000476837158,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Drill",
            "Vendor": ""
        }
    },
    "Flat Down Cut": {
        "{011baacc-68f6-4c1a-8f8b-6b27b8659214}": {
            "Category": "Flat Down Cut",
            "Diameter": 1.9500000476837158,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 8,
            "Length": 10,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 0.7799999713897705,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{035512a3-29eb-4c4f-acc8-ee6ef0950962}": {
            "Category": "Flat Down Cut",
            "Diameter": 2,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 9,
            "Length": 10,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 0.800000011920929,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{03b7a65b-1137-4e92-84b2-92d252df5013}": {
            "Category": "Flat Down Cut",
            "Diameter": 1.2000000476837158,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 4,
            "Length": 10,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 0.47999998927116394,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{2841d991-d9a3-4346-91b1-fe664c72307a}": {
            "Category": "Flat Down Cut",
            "Diameter": 1.399999976158142,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 5,
            "Length": 10,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 0.5600000023841858,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{399e2512-fe23-4442-8591-48ff9cce8e90}": {
            "Category": "Flat Down Cut",
            "Diameter": 0.800000011920929,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 2,
            "Length": 10,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 2000,
            "StepOver": 0.3199999928474426,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{39dde124-8bcd-4397-828c-24497ed157c2}": {
            "Category": "Flat Down Cut",
            "Diameter": 1,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 3,
            "Length": 10,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "Gold Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 0.4000000059604645,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{52d8119e-03bc-4b17-a371-2e9c464dad02}": {
            "Category": "Flat Down Cut",
            "Diameter": 1.600000023841858,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 6,
            "Length": 10,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 0.6399999856948853,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{95d4da54-4b1c-4f3b-9ef2-b39e3902ec3f}": {
            "Category": "Flat Down Cut",
            "Diameter": 3,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 11,
            "Length": 10,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 1.2000000476837158,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{bf9fe245-2ebe-437d-bac7-2ad1e6bd3613}": {
            "Category": "Flat Down Cut",
            "Diameter": 3.174999952316284,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 1,
            "Length": 22,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 1.2699999809265137,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{c4979459-71b7-47e0-a6ea-8a4b60de7715}": {
            "Category": "Flat Down Cut",
            "Diameter": 1.7999999523162842,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 7,
            "Length": 10,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 0.7200000286102295,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{c7244fbd-f972-4ec4-849d-87dff6a1a49a}": {
            "Category": "Flat Down Cut",
            "Diameter": 2.3499999046325684,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 10,
            "Length": 12,
            "MetricTool": true,
            "Name": "Flat Downcut 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 0.9399999976158142,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        }
    },
    "Flat Up Cut": {
        "{09ca7b76-2630-4286-a320-8880d4c1fcd3}": {
            "Category": "Flat Up Cut",
            "Diameter": 3.174999952316284,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 12,
            "Length": 17,
            "MetricTool": true,
            "Name": "Flat 1/8\" Upcut Short",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 5000,
            "StepOver": 1.2699999809265137,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{b06acb21-b047-43d7-86c2-284c7c6c6d97}": {
            "Category": "Flat Up Cut",
            "Diameter": 3.174999952316284,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 13,
            "Length": 25,
            "MetricTool": true,
            "Name": "Flat 1/8\" Upcut Long",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 5000,
            "StepOver": 1.2699999809265137,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        }
    },
    "Rough Cut": {
        "{106ff24f-afb6-4118-b19d-cf82ff9eecb1}": {
            "Category": "Rough Cut",
            "Diameter": 6.349999904632568,
            "FeedRate": 9.999133110046387,
            "FluteCount": 3,
            "IncludedAngle": 0,
            "Index": 32,
            "Length": 19.049999237060547,
            "MetricTool": false,
            "Name": "Rough Cut 3-Flute 1/4\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 5000,
            "StepOver": 3.174999952316284,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{b40dcaca-b8ce-4882-b20d-b0085fd2fd31}": {
            "Category": "Rough Cut",
            "Diameter": 6.349999904632568,
            "FeedRate": 9.999133110046387,
            "FluteCount": 4,
            "IncludedAngle": 0,
            "Index": 0,
            "Length": 19.049999237060547,
            "MetricTool": false,
            "Name": "Rough Cut 4-Flute 1/4\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 5000,
            "StepOver": 3.174999952316284,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        }
    },
    "Specialty": {
        "{48490c97-698a-46d1-a82a-a51a5e60c456}": {
            "Category": "Specialty",
            "Diameter": 10,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 46,
            "Length": 7,
            "MetricTool": true,
            "Name": "Round Over 1/8\" shank",
            "Notes": "Router Shapes Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 2.5,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 1000,
            "StepOver": 4,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "Round-over",
            "Vendor": ""
        },
        "{80032ce9-bfcf-4e8c-b57d-08a73003bb2f}": {
            "Category": "Specialty",
            "Diameter": 8,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 34,
            "Length": 4.5,
            "MetricTool": true,
            "Name": "Keyhole Bit - See Notes",
            "Notes": "8mm+5mm Slots\n3.5mm+4.5mm depths",
            "PassDepth": 4,
            "PlungeRate": 1.1514666080474854,
            "Radius": 0,
            "RampAngle": 0.5,
            "RampRate": 0.04233333095908165,
            "SpindleSpeed": 2500,
            "StepOver": 3.200000047683716,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        }
    },
    "Straight": {
        "{59592b3e-5a85-449a-9eb0-c87f7cc7e80b}": {
            "Category": "Straight",
            "Diameter": 22,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 20,
            "Length": 22,
            "MetricTool": true,
            "Name": "Straight 22mm 1/8\" shank",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 8.800000190734863,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{5f3cb5ef-68d4-47e6-8d94-f72d61a5a868}": {
            "Category": "Straight",
            "Diameter": 6.349999904632568,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 21,
            "Length": 12.999974250793457,
            "MetricTool": false,
            "Name": "Straight 1/8\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 2.5399999618530273,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{7e37df9c-75f3-4ff7-9a58-57d2bbcb48b7}": {
            "Category": "Straight",
            "Diameter": 12.699999809265137,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 22,
            "Length": 24.999950408935547,
            "MetricTool": false,
            "Name": "Straight 1/4\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 5.079999923706055,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        },
        "{ca5154fa-d116-4d2a-a589-9f7667783c59}": {
            "Category": "Straight",
            "Diameter": 25.399999618530273,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 0,
            "Index": 23,
            "Length": 19.99995994567871,
            "MetricTool": false,
            "Name": "Straight 1/4\" shank",
            "Notes": "",
            "PassDepth": 0.9999979734420776,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 3000,
            "StepOver": 10.15999984741211,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "End Mill",
            "Vendor": ""
        }
    },
    "Vbit": {
        "{262c40fc-63ca-47cb-a85d-af85a8022664}": {
            "Category": "Vbit",
            "Diameter": 3.174999952316284,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 20,
            "Index": 18,
            "Length": 8.979000091552734,
            "MetricTool": true,
            "Name": "Vbit 20Deg",
            "Notes": "",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0.004999999888241291,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 5000,
            "StepOver": 1.2699999809265137,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "V-Bit",
            "Vendor": ""
        },
        "{83a55572-b81e-4604-8fe6-1c38c21c281a}": {
            "Category": "Vbit",
            "Diameter": 3.174999952316284,
            "FeedRate": 9.999133110046387,
            "FluteCount": 2,
            "IncludedAngle": 90,
            "Index": 19,
            "Length": 1.5870000123977661,
            "MetricTool": true,
            "Name": "Vbit 90Deg",
            "Notes": "Router Shapes Set",
            "PassDepth": 1,
            "PlungeRate": 1.9981331825256348,
            "Radius": 0,
            "RampAngle": 22.5,
            "RampRate": 1.9981331825256348,
            "SpindleSpeed": 5000,
            "StepOver": 1.2699999809265137,
            "TipLength": 0,
            "ToolSpecURL": "",
            "Type": "V-Bit",
            "Vendor": ""
        }
    }
}