One year I made a small Christmas decoration that surprisingly many people have downloaded and made themselves.
I thought it was time to give something back to the forum and will therefore upload a file here for free use again.
The items are locked in properties, so unlock it 
3 mm birch plywood was used, but for the dowels I used 3.8 mm material - you have to adapt your materials.
The laser values/settings and kerf must be found by you, to what may suit your machines - do not use them from the file.
For the locking mechanism I have used 4 magnets, 2 of them are inserted into pockets that I have “deep-engraved” and secured with a drop of superglue.
As a hinge I use a small round stick/dowel, whatever I could find - you have to adapt the drawing to what you find in your workshop.
Merry Christmas to you all and thank you for many good hours together here in the forum.
I wish the best to those who are sick and not feeling well right now.
It is my own project/drawing and it is as it is. It may be used freely, but I take no responsibility for possible errors and the consequences this may cause.
LB-Cardholder.lbrn2 (66.8 KB)
