ALARM:2 G-code motion

From Ever Since I got my Rotary Roller ( which works well) when I set back my settings to normal engraving, it tells me this

G-code motion target exceeds machine travel. Machine position safely retained. Alarm may be unlocked. (Right-click the ‘Devices’ button to reset the connection)

On or near line 2:

Even when I Set the start form to Current Position is also says

Cut might be out of bound anyway but the laser does not move at all

I NEED HELP

$$

$0=5.0

$1=100

$2=0

$3=6

$4=7

$5=7

$6=1

$10=2047

$11=0.050

$12=0.002

$13=0

$14=6

$15=0

$16=1

$17=4

$18=0

$19=0

$20=1

$21=1

$22=1

$23=3

$24=600.000

$25=3000.000

$26=100

$27=3.000

$28=0.100

$29=0.0

$30=1000.

$31=0.

$32=1

$33=1000.000

$34=0.000

$35=0.000

$36=100.000

$37=0

$39=1

$40=0

$41=0

$42=1

$43=1

$44=3

$45=4

$46=0

$56=1.000

$57=1800.000

$58=395.000

$59=6000.000

$60=0

$61=0

$62=0

$63=3

$64=1

$65=0

$100=80.000

$101=80.000

$102=2124.000

$110=10200.000

$111=10200.000

$112=600.000

$120=2200.000

$121=1800.000

$122=200.000

$130=400.000

$131=400.000

$132=100.000

$259=0

$260=70

$261=70

$262=320

$263=30

$264=0

$265=50

$266=100

$267=0

$268=0

$269=0

ok

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.