Can someone help me get my settings straight, I am getting an Alarm 2 when i try to run a job. Following the instructions on another post I set machine manually to front left with power off, got these settings
$i
[VER:1.1f.20230129:leadmachine1010laser]
[OPT:VNSL2,35,1024,3,0]
Target buffer size found
[AXS:3:XYZ]
[NEWOPT:ENUMS,RT+,HOME,REBOOT,TC,SED,RTC,WIFI,SD]
[FIRMWARE:grblHAL]
[NVS STORAGE:*FLASH]
[DRIVER:ESP32]
[DRIVER VERSION:230125]
[DRIVER OPTIONS:4.3.1]
[BOARD:BlackBox X32]
[AUX IO:1,0,0,0]
[WIFI MAC:EC:64:C9:A5:F9:20]
[IP:0.0.0.0]
[PLUGIN:WebUI v0.14]
[PLUGIN:SDCARD v1.07]
ok
$$
$0=10.0
$1=255
$2=0
$3=3
$4=0
$5=7
$6=1
$8=0
$9=1
$10=510
$11=0.010
$12=0.002
$13=0
$14=0
$15=0
$16=0
$17=0
$18=0
$19=0
$20=1
$21=1
$22=1
$23=3
$24=200.0
$25=1000.0
$26=250
$27=5.000
$28=0.100
$29=5.0
$30=1000.000
$31=0.000
$32=1
$33=2500.0
$34=0.0
$35=0.0
$36=100.0
$37=0
$39=1
$40=1
$43=1
$44=4
$45=3
$46=0
$62=0
$63=2
$64=0
$65=0
$70=7
$73=1
$74=
$75=
$100=199.100
$101=199.100
$102=199.100
$110=4000.000
$111=4000.000
$112=4000.000
$120=700.000
$121=700.000
$122=700.000
$130=810.000
$131=800.000
$132=85.000
$300=Grbl
$302=192.168.5.1
$303=192.168.5.1
$304=255.255.255.0
$305=23
$306=80
$307=81
$341=0
$342=30.0
$343=25.0
$344=200.0
$345=200.0
$346=1
$370=0
$384=0
$396=30
$397=0
$398=35
$481=0
ok
$#
[G54:-804.997,-724.997,-4.997]
[G55:0.000,0.000,0.000]
[G56:0.000,0.000,0.000]
[G57:0.000,0.000,0.000]
[G58:0.000,0.000,0.000]
[G59:0.000,0.000,0.000]
[G59.1:0.000,0.000,0.000]
[G59.2:0.000,0.000,0.000]
[G59.3:0.000,0.000,0.000]
[G28:-1419.031,520.146,-103.596]
[G30:-1419.031,520.146,-103.596]
[G92:0.000,0.000,0.000]
[HOME:-805.000,-795.000,-5.000:7]
[TLO:0.000,0.000,0.000]
[PRB:0.000,0.000,0.000:0]
ok
?
<Idle|WPos:0.000,-70.000,0.000|Bf:35,1023|FS:0,0|Ov:100,100,100|H:1>
ok
Then jogged all the way to back right as far as i could and my get position was this:
x:728.10 y:720 z:0
Thanks for the help.