Big graphics process on xTool D1

[berainlb (PY)]

@Richfl

large area idea does not work with the D1

There’s nothing that relies on specific capabilities of the D1 for this to work.

@Richfl

Then I manually (physically) moved the laser to one position in the unit

Are you using jogging controls to do this or manipulating by hand? This has to be done with jogging controls.

Also, you need to be using Absolute Coords if you are not now.

You may want to review these steps that Oz documented as it’s a good explanation of the steps required.

Reopen Problem with Print&Cut on LM Pro L4

Are you following the steps properly? You have to do this, exactly: Select the shape in LightBurn that represents the first target on your design Jog the laser to the location of that target on the laser Click the ‘Set First Target Position’ button Select the shape in LightBurn that represents the second target Jog the laser to the position of that target on the laser Click the ‘Set Second Target Position’ button If you don’t change the selected object after step 3 OR you don’t jog the laser…