Camera setup, iOS and 8mp

[LightBurn (Oz)]

Open Facetime or the photo app full-screen and use that to focus the image with.

Read through the tips here for calibration:

The camera doesn't find the lens calibration pattern (pattern NOT found)

The most common problems people have with the lens calibration are as follows: Honeycomb bed is visible, confusing the circle-finding code. Cover the honeycomb with a bed sheet, cardboard, paper, wood, etc. Camera isn’t in focus. Focus the camera as well as you can to get a clear image. All of the LightBurn cameras are manually focused by twisting the lens Calibration pattern is too small (or too large) in the view - you want the pattern to fill roughly one of these squares for each c…

You shouldn’t have to calibrate it - you can just use the presets.