It works.
I have no explanation.
Console here:
Waiting for connection…
ok
[VER:AAS11A0083-AA-V1.05.Aug 14 2025:,Machine:SWIFT]
[OPT:MHSW,3000,4096]
Target buffer size found
[MSG:Machine:SWIFT]
[PV=1.0:MSG:Mode=STA:SSID=M6-Cams:Status=Connected:IP=192.168.0.131:MAC=20-6E-F1-E9-28-B8]
[PV=1.0:MSG:Mode=AP:SSDI=SWIFT_47144:IP=192.168.4.1:StationNum=0:MAC=22-6E-F1-E9-28-B8]
ok
[G54:0.000,0.000,0.000,0.000]
[G55:0.000,0.000,0.000,0.000]
[G56:0.000,0.000,0.000,0.000]
[G57:0.000,0.000,0.000,0.000]
[G58:0.000,0.000,0.000,0.000]
[G59:0.000,0.000,0.000,0.000]
[G28:0.000,0.000,0.000,0.000]
[G30:0.000,0.000,0.000,0.000]
[G92:0.000,0.000,0.000,0.000]
[TLO:0.000]
[PRB:0.000,0.000,0.000,0.000:0]
ok
It makes no sense. I rebooted the laptop for the 738th time, I cycled power on the laser for the 685th time, set it to what it’s ‘Supposed’ to be, which I have tried before:
DTR disabled
460,800 baud rate
Buffered transfer mode
I’m blown away! Thank you everyone, especially @NicholasL. It’s almost 11pm my time, so tomorrow after work I going to try and calibrate my AC1 camera.
To everyone who helped or made a suggestion, I owe you a cold beer.
If you ever find yourself in Whitehorse, Yukon, Canada, drop me a line.
Cheers,
Kevin