It just says waiting for connection its been working for weeks stopped after update any ideas what to do
I have restarted all device’s
quick update i have managed to get it working on the ortur app but just not connecting to LB
also i have managed to get it connected via usb which is fine for now but not any good for the reason i purchased it
$$ settings while connected to usb
Waiting for connection…
Waiting for connection…
[MSG:25:Info: USB SERIAL STREAM CONNECTED]
Ortur Laser Master 3 Lite Ready!
OLF:209.
OLH:OLM_ESP_PRO_V2.4D.
OLM:GENERAL.
GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]
ok
[ORIGIN:China]
[PRODUCER:ORTUR]
[AUTHOR:LEADIFFER]
[MODEL:Ortur Laser Master 3 Lite]
[OLF:209]
[OLH:OLM_ESP_PRO_V2.4D]
[OLM:GENERAL]
[DATE:20230202]
[SN:5E33875FE597F6D25C8E6803D6868255]
[VER:1.1f.20220325:]
[OPT:VNZHS+,63,32767,3,0]
Target buffer size found
[NEWOPT:ENUMS,RT+,HOME,NOPROBE,TC,SED,UD,CLU,WIFI,FTP,TMC=3,SD,ITG,GT,YRR]
[FIRMWARE:grblHAL]
[NVS STORAGE:*FLASH]
[DRIVER:ESP32-S2]
[DRIVER VERSION:220327]
[DRIVER OPTIONS:GIT-NOTFOUND]
[BOARD:Ortur Laser Master 3 Lite]
[TYPE:OLM3LE]
[CLUSTER:16]
Cluster size found
[WIFI MAC:58:CF:79:A7:11:D6]
[IP:192.168.0.27]
[PLUGIN:Power Detecter v1.0]
[PLUGIN:Power Control v1.0]
[PLUGIN:gyroscope sensor v1.0]
[PLUGIN:Trinamic v0.09]
[PLUGIN:SDCARD v1.05]
[PLUGIN:ITG STREAM v1.00]
[PLUGIN:ESP32 WebUI v0.03]
[PLUGIN:GADGET v1.00]
[PLUGIN:YRR v1.00]
ok
Homing
<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:24843,50|Ov:100,100,100|A:SFM|H:1,7>
<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1414,0|CL:0,0|PS:2,0|VA:24860,43|A:SFM>
ok
$$
$0=5.0
$1=100
$2=0
$3=1
$4=7
$5=0
$7=0
$10=2047
$11=0.050
$12=0.002
$13=0
$14=0
$15=3
$16=1
$17=4
$18=0
$20=1
$21=0
$22=1
$23=7
$24=800.0
$25=1000.0
$26=100
$27=1.000
$28=0.100
$29=0.0
$30=1000.000
$31=0.000
$32=1
$33=2000.0
$34=0.0
$35=0.0
$36=100.0
$37=0
$39=1
$40=1
$41=0
$42=1
$43=1
$44=3
$45=0
$46=0
$56=1.0
$57=1800.0
$58=395.0
$59=6000.0
$60=0
$61=1
$62=0
$63=3
$64=0
$70=31
$73=3
$74=free wifi
$75=************
$76=OLM3LE_AP_11D6
$77=12345678
$100=100.000
$101=100.000
$102=100.000
$110=15060.000
$111=15060.000
$112=600.000
$120=2000.000
$121=1800.000
$122=200.000
$130=400.000
$131=400.000
$132=100.000
$140=600
$141=800
$142=800
$150=16
$151=16
$152=16
$160=0.000
$161=0.000
$162=0.000
$180=15060.000
$181=10542.000
$182=600.000
$200=65.0
$201=60.0
$202=60.0
$210=100
$211=100
$212=100
$220=50.0
$221=55.0
$222=60.0
$270=115200
$271=115200
$272=115200
$300=OLM3LE_STA_11D6
$301=1
$302=192.168.5.1
$303=192.168.5.1
$304=255.255.255.0
$305=23
$306=80
$307=81
$308=21
$310=OLM3LE_AP_11D6
$312=192.168.5.1
$313=192.168.5.1
$314=255.255.255.0
$330=admin
$331=user
$332=255
$339=3
$341=0
$342=30.0
$343=30.0
$344=180.0
$345=200.0
$384=0
$392=5.0
$393=3.0
$600=0
$601=5
$602=0
$603=5.0
$604=6.0
$605=1
$606=1
$607=0
$608=1
$609=10.000
$610=0
$611=0
$612=1
$613=20303
$614=0
$616=0
$617=0
$622=111
ok
Are you able to ping this address from your computer?
And is this the address that you have configured for the device in LightBurn?
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.