using easel controller
in light burn Console box
Waiting for connection…
Grbl 1.1g [‘$’ for help]
ok
[VER:1.1g.20170629-Inventables:]
[OPT:VMP+,15,128]
Target buffer size found
ok
$0=10
$1=255
$2=0
$3=3
$4=0
$5=0
$6=0
$10=115
$11=0.020
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=3
$24=25.000
$25=750.000
$26=250
$27=1.000
$30=1000
$31=0
$32=1
$100=40.000
$101=40.000
$102=188.976
$110=8000.000
$111=8000.000
$112=500.000
$120=500.000
$121=500.000
$122=50.000
$130=750.000
$131=750.000
$132=100.000
ok
talked to a lightburn tech but feeling lost. any sites where i can go to follow step for step on this issue? watched a video on youtube channel (everything x carve) and followed the steps but laser is not burning . help please!
