Can't get the laser to go to the lower left, for home settings

Community Laser Talk
1

Need help setting my settings for home

2

Provide some details.

1 Like
3

image
image734×64 2.68 KB

image

4

I’m interested in this also.

I have the XTool D1 Pro 2.0 and the extension rails.

My laser is oriented long-wise to the computer (930mm x 430mm), with Home being in the upper right corner, but LightBurn has the orientation of the laser vertically (430mm x 930mm), with Home being in the upper left corner.

How do I change the screen to match the orientation of the laser bed and the home to be in the lower left corner?

Can that be done? Or do I need to physically move my laser bed and computer to be oriented to each other? :slight_smile:

5

Perhaps:

By definition, the controller’s origin (a.k.a. Home) position is where the homing switches are: you must configure LightBurn to match the hardware, not the other way around:

Confusingly, the machine’s hardware origin is independent of the various other origins associated with the objects in the LightBurn workspace:

6

Thank you. I gave up.
I’ll just change the orientation in my head.