D1 Pro w/ 40W head ALWAYS triggers limit switch when starting a job from home position

[berainlb (PY)]

Review this post:

xTools D1 Pro - Laser Offset settings - 40w

xTool website indicates that the value should be Y-21 for the 40W module. Set the Laser Positioning Offset – xTool This is odd. It should be perfectly consistent. If it’s not that could imply a mechanical issue. Make sure that belt tension is proper. Also check that pinion gear is not slipping on the stepper shaft. Do burns otherwise look correct in spite of the offset issue? Try this: disable the pointer offset move the laser module to the middle of the bed and place a sacrificial materi…

From what I saw the 40W laser module requires a pointer offset of Y-21. Is this how yours is configured?