Mallman
March 21, 2023, 1:48am
1
I am trying to engrave squares and circles on acrylic but the likes won’t complete . In the square they are missing the corners and in the circle there’s a missing part of the line.
Rick
March 21, 2023, 2:13am
2
This might be worth review:
This is an issue with the speed and power setting you have chosen, and how Ruida deals with ramping power for direction changes.
Ruida has a ‘Start Speed’ or corner speed which is the point the tube will start to fire and ramp power to the max setting as it accelerates. Below that speed, the laser will use min power and if that is set low, you will not get a beam in the corners. If you want to go slow for cuts, set both min and max the same.
I recently provided another response to the same que…
Mallman
March 21, 2023, 2:46am
3
Thank you! Will try that!
1 Like
system
April 20, 2023, 2:46am
4
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
