Hey, I’m new to LightBurn and I really need your help!
This is the error that I get whenever I press the home button:
error:5
Homing cycle is not enabled in your Grbl settings
I pressed $$ and this is what I got:
$0=10
$1=25
$2=0
$3=0
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=1000
$31=0
$32=1
$100=80.000
$101=80.000
$102=250.000
$110=6000.000
$111=6000.000
$112=1000.000
$120=1000.000
$121=1000.000
$122=10.000
$130=410.000
$131=400.000
$132=200.000
ok
I’m hoping you can help me out on how to set the homing cycle for the laser thanks