Hi all, Im trying to engrave a design of 30x30cms, i did the frame and trial before, but now im trying to start the project and this error keeps on coming rather im starting the engraving or framing: “Error - Flame protection triggered. The machine has halted. Please restart your machine.”
I have noticed that in the console panel bunch of number codes are coming and it keeps on coming, basically i cant do anything, and 10min before it was working when doing sampling.
Im attaching console panel, and as well setting, due im printing in felt fabric in higher speed it wont engrave anything, no clue why.
Please help, thank you.
I would try it on lasergrbl to see if you have same problem. If you do I would reinstall firmware.
In the upper right of this page, click om the magnifying glass. In the text box, enter flame detection and you will get a lot of info on this feature.
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.