Hello guys, I accidentally set the $120 GRBL setting to 0 due to a keyboard glitch that I did not notice. This caused a complete loss of communication, and I could no longer move the laser. The machine did not respond via LightBurn, the control panel, or the mobile app. I’ve tried $RST=* on the console, but without success.
The only solution I found was to flash the firmware, but I made a crucial mistake: I installed the firmware for the Alpha MK2 instead of the correct firmware for my DIY Kit MK2.
As a result of this series of errors, the machine is now showing no signs of life, despite receiving power.
Could anyone please provide me with the exact .bin firmware recovery package for USB cable flashing for my machine?
Thank you for your help.