just installed 0.8.0.1 rc3
everything was working fine prior
now i get this in the console
cant move any axis in positive direction
Waiting for connection…
ok
ok
[VER:3.9 FluidNC v3.9.1:]
[OPT:MPHS]
[MSG:Machine: LowRider]
[MSG:Mode=AP:SSID=FluidNC:IP=192.168.0.1:MAC=48-E7-29-98-41-8D]
ok
[G54:3.000,3.000,3.000]
G54 Offset values not 0
[G55:0.000,0.000,0.000]
[G56:0.000,0.000,0.000]
[G57:0.000,0.000,0.000]
[G58:0.000,0.000,0.000]
[G59:0.000,0.000,0.000]
[G28:0.000,0.000,0.000]
[G30:0.000,0.000,0.000]
[G92:0.000,0.000,0.000]
[TLO:0.000]
ok
[MSG:INFO: telnet auto report interval set to 200 ms]
ok
<Idle|MPos:3.000,0.000,3.000|FS:0,0|WCO:3.000,3.000,3.000>
[GC:G0 G54 G17 G21 G90 G94 M5 M9 T0 F7000 S0]
?<Idle|MPos:3.000,0.000,3.000|FS:0,0>
EDIT : found problem, on new install it automatically changed home to top right not bottom left ??
possible bug