So if I use current position, everything is fine and the job cuts but I want to be able to position anything anywhere, when I switch to absolute cords the machine is in a different place to the software meaning it tries to go past the limit switches. I have tried to look on guide but nothing seems to be doing what I need. Does anyone have an idiot proof guide to setting these cords?
$0=10
$1=125
$2=0
$3=1
$4=0
$5=1
$6=0
$7=0
(ATC M6, pulse/ff)
$8=100
(ATC Tool Td, milliseconds)
$9=100
(ATC M6 Td, milliseconds)
$10=0
$11=0.010
$12=0.002
$13=0
$19=0
(Softstart, milliseconds)
$20=0
$21=0
$22=1
$23=3
$24=1000.000
$25=1000.000
$26=250
$27=2.000
$28=5
(Spindle freq. 0 to 15)
$30=255
$31=1
$32=1
$100=157.000
(x:stp/mm)
$101=157.000
(y:stp/mm)
$102=160.000
(z:stp/mm)
$103=160.000
(a:stp/mm)
$104=160.000
(b:stp/mm)
$110=12000.000
(x:mm/min)
$111=5000.000
(y:mm/min)
$112=5000.000
(z:mm/min)
$113=5000.000
(a:mm/min)
$114=5000.000
(b:mm/min)
$120=8000.000
(x:mm/s^2)
$121=3000.000
(y:mm/s^2)
$122=3000.000
(z:mm/s^2)
$123=3000.000
(a:mm/s^2)
$124=3000.000
(b:mm/s^2)
$130=320.000
(x:mm max)
$131=230.000
(y:mm max)
$132=200.000
(z:mm max)
$133=200.000
(a:mm max)
$134=200.000
(b:mm max)
Is anyone able to interpret this?
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.