Home point issue

[Rick (Technical Evangelist)]

@sheraaz

$32=0

This is one issue you are having. Did you enter $32=1 into the console, then hit Enter/Return? Looks like this is still not set correctly. Additionally, you will need to change the remaining settings as described in the link I provided above.

@LightBurn

$32 (laser mode) - Set this to 1 (or true / enabled). Laser Mode means that you don’t have a rotating spindle tool, we’re not pausing to wait for it to speed up / slow down when the PWM output changes, and the PWM output needs to be turned off when moving between cuts.

Laser mode ($32=1) is a ‘Variable Power’ mode which means the laser adjusts the power output from 0 at a dead stop to whatever power you request when it gets to the speed you request.