Homing issue with Ruida Gweike Cloud 55w

[keith2022 (keith melling)]

Hi Steve, I had so many issues with my gweike crashing into the side and back, skipping teeth on the belts , after contacting gweike support several times they finally ga me a solution that works and had no trouble since I slowed the y machine max speed down to 150, if you still have trouble with skipping and crashing into the side / back this could also be your issue,

I cannot delete a boarder from my last image crop

solved contacted gweike support , It was not a previous file, the heavy gantry cannot travel in the y axis at my engraving speed of 450 mm/sec, and must be slowed to 150mm/sec or the belts just skip teeth and cause all the problems. It can only handle high speed engraving on the x axis i’m told