Sure, I’m happy to make a guest appearance.
As Rick vaguely alludes to, I’ve been in the process of getting a new place and moving for the past while, as well as wearing many other hats, so have not been able to make much more progress than what I shared in that topic linked above.
- The manufacturer appeared to have butchered EEPROM support in their version of GRBL that they flashed on the controller and shipped with their units.
- You’ll need to flash stock GRBL onto the board, plain and simple. There are resources on how to do it on the internet. I haven’t yet done it myself for this machine so I don’t know if there are any hurdles that will need to be overcome. I hope that there are not.
LightBurn just makes the software, and we’re trying to help our users out by creating resources for how to use these machines (it’s on my roadmap for the future). We did not make, configure, or sell that machine to you. Ultimately, if you are unhappy with how they did things, or what you will have to do to get it to work better, I would encourage you to contact the machine vendor directly with your concerns/ feedback.
These are very strongly “DIY” machines, with an emphasis on the “Y”.